Présentation

Sujets de recherche

Acoustics, Noise and Vibration, Sensors and Devices, Mechatronics, Control System.

Disciplines de recherche

Mechanical Engineering, Electrical Engineering and Electronic Engineering.

Mots-clés

Structural health monitoring, Imaging algorithms, Piezoelectric devices, Biomedical devices, Smart materials, Active noise control, Active vibration control, Laser micro-machining, Micro-fabrication, MEMS.

Intérêts de recherche

Integration of sensors and actuators to create smart materials, miniaturization of mechanical actuators, microfabrication and MEMS, control strategies using an array of sensors and actuators, microfluidics.

Langues parlées et écrites

Anglais, Français

Prix et distinctions

• (2013) Discovery Accelerator Supplement. Natural Sciences and Engineering Research Council of Canada (NSERC). (Distinction).
• 1st prize for completed project. CRIAQ. (Prize / Award).
• 3rd prize for ongoing project. CRIAQ. (Prize / Award).
• ADRIQ/NSERC Homage prize. Natural Sciences and Engineering Research Council of Canada (NSERC). (Prize / Award).
• CHUS Excellence. Centre Hospitalier Univ. de Sherbrooke. (Prize / Award).
• Homage - 14-year member. AUTO21. (Prize / Award).

Financement

Grant. (Awarded). Co-investigator. Engineering of interactive technologies in rehabilitation (INTER). Fonds de recherche du Québec - Nature et technologies (FRQNT). Strategic Clusters. 600000 $ (2019-2025).

Grant. (Awarded). Principal Investigator. Compressive sensing based sparse transducers for ultrasound imaging. Natural Sciences and Engineering Research Council of Canada (NSERC). Discovery grant. 195000 $ (2020-2025).

Grant. (Under Review). Co-applicant. Distributed Digital Intelligence Network (D2IN): Disruptive and low-cost microsystems for edge computing. Ministère de l'Éducation, du Loisir et du Sport (MELS) (Québec). Suppliers. Programme de cofinancement d'infrastructures du Québec. 6468000 $ (2020-2025).

Grant. (Awarded). Co-investigator. Characterization of the mechanical and acoustic properties of advanced materials. Fonds de recherche du Québec - Nature et technologies (FRQNT). Team Research Project. 180000 $ (2020-2023).

Grant. (Under Review). Co-applicant. High speed infrared camera for research works in mechanical, civil and building engineering. Natural Sciences and Engineering Research Council of Canada (NSERC). Research Tools and Instruments. 142979 $ (2021-2023).

Scholarship. (Under Review). Co-applicant. MITACS Postdoctoral Internship for Maryam Hajizadeh - Machine learning for ultrasound-based touchscreen. Mathematics of Information Technology and Complex Systems (MITACS). All Waves Technologies (AWT). Internal Program. 30000 $ (2021-2022).

Grant. (Under Review). Principal Applicant. Interactive surface by active acoustic pressure mapping. PROMPT-Québec. 158000 $ (2020-2022).

Grant. (Awarded). Principal Investigator. Surface tactile par réflexion d'ondes ultrasonores. Natural Sciences and Engineering Research Council of Canada (NSERC). All Waves Technologies (AWT). Idea to Innovation - Phase 2b. 350000 $ (2020-2022).

Grant. (Awarded). Co-investigator. Echo-diagnostics and echo-therapy of pain. Fonds de recherche du Québec - Société et culture (FRQSC). Audace. 100000 $ (2019-2021).

Scholarship. (Awarded). Co-investigator. Post-doctoral scholarship for Nizar Bouhlel. WISE (Le Mans, France). International post-doctoral grant. 100000 $ (2020-2021).

Grant. (Awarded). Principal Investigator. GAUS (Groupe d'Acoustique et Vibrations de l'Université de Sherbrooke). Fonds Institutionnel de Recherche de l'Université de Sherbrooke. Programme de reconnaissance de Centre. 249682 $ (2015-2021).

Grant. (Awarded). Co-investigator. dXBel: development and qualification of an acoustic design tool, application to the noise control of recreative vehicles. Natural Sciences and Engineering Research Council of Canada (NSERC). Bombardier Recreational Products (BRP). Internal Program. 2115672 $ (2017-2021).

Grant. (Awarded). Principal Investigator. Ultrasonic pressure mapping. All Waves Technologies (AWT). Internal Program. 46641 $ (2019-2020).

Contract. (Completed). Principal Investigator. Implementation of a system for leak detection in firehoses. Niedner Inc. Internal Program. 5070 $ (2020).

Grant. (Completed). Principal Investigator. Implementation of an art-science technology. Sporobole. Programme arts, sciences et technologies. 6800 $ (2018-2019).

Grant. (Completed). Principal Investigator. Ultrasound-based touchscreen. Natural Sciences and Engineering Research Council of Canada (NSERC). Idea to Innovation - Phase 1b. 60000 $ (2019).

Contract. (Completed). Principal Investigator. Measurement of modal behavior of a rolling cart. Mobilités Mondiales Inc. Internal Program. 1860 $ (2019).

Contract. (Completed). Principal Investigator. Leak detection in firehoses. Niedner Inc. Internal Program. 7043 $ (2019).

Grant. (Completed). Co-investigator. Engineering of interactive technologies in rehabilitation (INTER). Fonds de recherche du Québec - Nature et technologies (FRQNT). Strategic Clusters. 600000 $ (2013-2019).

Scholarship. (Completed). Principal Investigator. MITACS Globalink Internship for Mahassen Ardhaoui - Hardware implementation of an ultrasound-based touchscreen. Mathematics of Information Technology and Complex Systems (MITACS). Globalink. 10000 $ (2019).

Contract. (Completed). Principal Investigator. Optimization of a touchscreen technology to a spherical screen. Global Imagination Inc. Internal Program. 17205 $ (2018-2019).

Contract. (Completed). Principal Investigator. Application of a touchscreen technology to a spherical screen. Global Imagination Inc. Internal Program. 3600 $ (2018).

Grant. (Completed). Co-investigator. Magneto-rheological orthesis. Fonds de recherche du Québec - Nature et technologies (FRQNT). Regroupement stratégique INTER. 17500 $ (2017).

Grant. (Completed). Principal Investigator. Implementation of a non-destructive method for damage detection in cardboard tubes. Natural Sciences and Engineering Research Council of Canada (NSERC). Abzac Canada. Internal Program. 25000 $ (2017).

Grant. (Completed). Principal Investigator. Ultrasonic technologies for arts. Sporobole. Programme arts, sciences et technologies. 42000 $ (2016-2017).

Contract. (Completed). Principal Investigator. Expert report on sound measurement technology - Phase II. Soft dB. Internal Program. 1004 $ (2017).

Contract. (Completed). Principal Investigator. Expert report on sound measurement technology. Soft dB. Internal Program. 2009 $ (2017).

Scholarship. (Completed). Co-investigator. Industrial Innovation Scholarship - BMP Innovation Program for Mihindou Mbina. Fonds de recherche du Québec - Nature et technologies (FRQNT). Auscultech Inc. BMP Innovation. 27000 $ (2014-2017).

Contract. (Completed). Principal Investigator. Validation of performance for an ultrasound-based pressure mapping system. Bioseb / EB Instruments. Internal Program. 2010 $ (2016-2017).

Grant. (Completed). Principal Investigator. Development of a non-destructive method for damage detection in cardboard tubes. Natural Sciences and Engineering Research Council of Canada (NSERC). Abzac Canada. Engage. 25000 $ (2016).

Contract. (Completed). Principal Investigator. Expert report on a methodology to measure noise levels. Soft dB. Internal Program. 1674 $ (2016).

Publications

Articles de revue

• N. Bouslama*, N. Quaegebeur, A. Maslouhi, P. Masson. (2020). Impact of manufacturing flaw on fatigue damage development in woven composite plates. Composites Part A: Applied Science and Manufacturing, (Submitted).
• M. Bilodeau*, N. Quaegebeur, A. Berry, P. Masson. (2020). Phase coherence approach in correlation-based medical ultrasound imaging. Ultrasonics, (Submitted).
• V. Serey*, N. Quaegebeur, M. Renier, P. Micheau, P. Masson, M. Castaings. (2020). Selective generation of ultrasonic guided waves for damage detection in rectangular bars. Structural Health Monitoring, (Accepted).
• Y. Keshmiri Esfandabadi*, M. Bilodeau*, P. Masson, L. De Marchi. (2019). Deep learning for enhancing wavefield image quality in fast non-contact inspections. Structural Health Monitoring, (In Press).
• N. Bouslama*, A. Maslouhi, P. Masson. (2019). Experimental and numerical investigation of damage evolution in CFRP stiffened panel in post-buckling regime. Journal of Composite Structures, (Submitted).
• N. Bouslama*, A. Maslouhi, P. Masson. (2019). Identification of damage scenarios in hybrid lapjoint using monitoring tools and finite element modeling under static and fatigue loading. Structural Health Monitoring, (Submitted).
• V. Serey*, N. Quaegebeur, P. Micheau, P. Masson, M. Castaings, M. Renier. (2019). Selective generation of ultrasonic guided waves in a bi-dimensional waveguide. Structural Health Monitoring, 18(4), 1324-1336. (Published).
• M. Bilodeau*, N. Quaegebeur, O. Robin, P. O’Donoughue*, P. Masson, A. Berry. (2019). Time domain imaging of transient noise sources using phase coherence. J. Acoust. Soc. Am., 146(6), 4851-4859. (Published).
• M.-A. Bégin*, P. Chouinard*, L.-P. Lebel*, P. Masson, Y. Pasco, J.-S. Plante, A. Berry. (2018). Experimental assessment of a controlled slippage magnetorheological actuator for active seat suspensions. IEEE/ASME Trans. Mechatronics, 23(4), 1800-1810. (Published).
• M. H. Sherafat*, N. Quaegebeur, L. Lessard, P. Hubert, P. Masson. (2018). Experimental model of impact damage for guided wave-based inspection of composites. ASME Journal of Nondestructive Evaluation, Diagnostics and Prognostics of Engineering Systems, 1(4), 040801. (Published).
• N. Quaegebeur, P. Masson, C. Ardin, P.-M. D'Anglade, A. Berry. (2018). Ultrasonic Non-Destructive Testing of cardboard tubes using air-coupled transducers. NDT & E International, 93, 18-23. (Published).
• J. Moriot*, N. Quaegebeur, A. Le Duff, P. Masson. (2017). A model-assisted approach for assessing detection and localization performance of guided wave-based imaging techniques. Structural Health Monitoring, 1-13. (Published).
• P.-C. Ostiguy*, N. Quaegebeur, P. Masson. (2017). Comparison of model-based damage imaging techniques for transversely isotropic composites. Structural Health Monitoring, 16(4), 428-443. (Published).
• M. Bilodeau*, N. Quaegebeur, P. Masson. (2017). Design of a guided wave absorber for Structural Health Monitoring system development. NDT & E International, 88, 33-41. (Published).
• N. Quaegebeur, N. Bouslama*, M. Bilodeau, R. Guitel*, P. Masson, A. Maslouhi, P. Micheau. (2017). Guided wave scattering by a geometrical feature: application to characterization of fatigue and machined cracks. Ultrasonics, 73, 187-195. (Published).
• A. B. Desbiens*, J.-S. Plante, P. Masson, K. Iagnemma, C. Véronneau*. (2017). On the potential of hydrogen-powered hydraulic pumps for soft-robotics. Soft Robotics, 4(4), 367-378. (Published).
• H. Hariri*, J. Kim, W.S. Kim, L. Frechette, P. Masson. (2017). Performance validation of printed strain sensors for active control of intelligent tires. Applied Acoustics, 123, 73-84. (Published).
• P. Y. Moghadam*, N. Quaegebeur, P. Masson. (2016). Design and optimization of a multi-element piezoelectric transducer for mode-selective generation of guided waves. Smart Mater. Struct., 25, 075037. (Published).
• N. Quaegebeur, T. Padois*, P.-A. Gauthier, P. Masson. (2016). Enhancement of time-domain acoustic imaging using the Generalized Cross-Correlation and spatial weighting. Mechanical Systems and Signal Processing, 75, 515-524. (Published).
• M. H. Sherafat*, N. Quaegebeur, P. Hubert, L. Lessard, P. Masson. (2016). Finite element modelling of Lamb wave propagation in composite stepped joints. Journal of Reinforced Plastics and Composites, 35(10), 796-806. (Published).
• M. H. Sherafat*, R. Guitel*, N. Quaegebeur, L. Lessard, P. Hubert, P. Masson. (2016). Guided wave scattering behaviour in composite bonded assemblies. Journal of Composite Structures, 136, 696-705. (Published).
• M. H. Sherafat*, R. Guitel*, N. Quaegebeur, P. Hubert, L. Lessard, P. Masson. (2016). Structural Health Monitoring of a composite skin-stringer assembly using within-the-bond strategy of guided wave propagation. Journal of Materials and Design, 90, 787-794. (Published).
• C.R. Halkyard, P. Masson. (2016). Time-domain flexural wave intensity estimation in orthotropic Kirchhoff plates. J. Sound and Vibration, 368, 55-70. (Published).
• N. Quaegebeur, P. Masson, N. Beaudet, P. Sarret. (2016). Touchscreen surface based on interaction of ultrasonic guided waves with a contact impedance. IEEE Sensors Journal, 16(10), 3564-3571. (Published).
• A. Gérard, S. Moreau, A. Berry, P. Masson. (2015). Design of multi-modal obstruction to control tonal fan noise using modulation principles. J. Sound and Vibration, 356, 34-47. (Published).
• N. Quaegebeur, P.-C. Ostiguy*, P. Masson. (2015). Hybrid empirical / analytical modeling of guided wave generation by circular piezoceramics. Smart Mater. Struct., 24(3), (Published).
• P.Y. Moghadam*, N. Quaegebeur, P. Masson. (2015). Mode selective generation of guided waves by systematic optimization of the interfacial shear stress profile. Smart Mater. Struct., 24(1), 015003. (Published).
• P.-C. Ostiguy*, N. Quaegebeur, P. Masson. (2015). Non-destructive evaluation of coating thickness using guided waves. NDT & E International, 76, 17-25. (Published).
• P. Masson, N. Atalla, A. Berry, Y. Champoux, P. Micheau, R. Panneton. (2015). Unique resources for research and development in acoustics and vibration at Groupe d'Acoustique de l'Université de Sherbrooke (GAUS). J. Canadian Acoust. Assoc., 43(2), 40-41. (Published).
• K.R. Mulligan*, N. Quaegebeur, P. Masson, L.-P. Brault*, C. Yang. (2014). Compensation of piezoceramic bonding layer degradation for structural health monitoring. Structural Health Monitoring, 13(1), 68-81. (Published).
• N. Quaegebeur, P.-C. Ostiguy*, P. Masson. (2014). Correlation-based imaging technique for fatigue monitoring of riveted lap-joint structure. Smart Mater. Struct., 23(5), 055007. (Published).
• P.-C. Ostiguy*, A. Le Duff, N. Quaegebeur, L.-P. Brault*, P. Masson. (2014). In-situ characterization technique to increase robustness of imaging approaches in structural health monitoring using guided waves. Structural Health Monitoring, 13(5), 525-536. (Published).
• R. Mohamed*, P. Masson. (2014). Numerical dispersion analysis of time domain spectral element for Lamb waves propagation. Wave Motion, (Submitted).
• M. Cardinal*, P. Masson. (2014). Sensitivity analysis of the SA160 general aviation aircraft dynamic model. Canadian Aeronautics and Space Journal, (Revision Requested).
• K.R. Mulligan*, C. Yang, N. Quaegebeur, P. Masson. (2013). A data-driven method for predicting structural degradation using a piezoceramic array. Journal of Prognostics and Health Management, 4(2), 223-236. (Published).
• K.R. Mulligan*, N. Quaegebeur, P.-C. Ostiguy*, P. Masson, S. Létourneau. (2013). Comparison of metrics to monitor and compensate for piezoceramic debonding in structural health monitoring. Structural Health Monitoring, 12(2), 153-168. (Published).
• C.R. Halkyard, P. Masson. (2013). Impact localisation in orthotropic plates using flexural wave intensity measurement. Key Engineering Materials, v569-570, 718-725. (Published).
• A. Gérard*, M. Besombes, A. Berry, P. Masson, S. Moreau. (2013). Tonal noise control from centrifugal fans using flow control obstructions. Noise Control Engineering Journal, 61(4), 381-388. (Published).
• A. Gérard*, A. Berry, P. Masson, S. Moreau. (2013). Use of a beat effect for the automatic positioning of flow obstructions to control tonal fan noise: Theory and experiments. J. Sound and Vibration, 332(19), 4450-4460. (Published).
• W. Belgacem*, A. Berry, P. Masson. (2012). Active vibration control on a quarter-car for cancellation of road noise disturbance. J. Sound and Vibration "Recognized by ScienceDirect among the Top 25 of the articles published in J. Sound and Vibration in 2012", 331, 3240–3254. (Published).
• N. Quaegebeur, P. Masson, P. Micheau, N. Mrad. (2012). Broadband generation of ultrasonic guided waves using piezoceramics and sub-band decomposition. IEEE Trans. Ultrasonics, Ferro., Freq., 59(5), 928-938. (Published).
• N. Quaegebeur, P. Masson. (2012). Correlation-based imaging technique using ultrasonic transmit-receive array for Non-Destructive Evaluation. Ultrasonics, 52(8), 1056-1064. (Published).
• P.-C. Ostiguy*, N. Quaegebeur, K.R. Mulligan*, P. Masson, S. Elkoun. (2012). In situ mechanical characterization of isotropic structures using guided wave propagation. Smart Mater. Struct., 21(065010), 9 pages. (Published).
• N. Quaegebeur, P. Micheau, P. Masson, M. Castaings. (2012). Methodology for optimal configuration in Structural Health Monitoring of composite bonded joints. Smart Mater. Struct. "Selected to be included in the compilation " Highlights of 2012", 21(105001), 11 p. (Published).
• N. Quaegebeur, P. Masson, D. Langlois-Demers, P. Micheau. (2011). Dispersion-based imaging for structural health monitoring using sparse and compact arrays. Smart Mater. Struct., 20, 12 p. (Published).
• F. Bergeron, C. Astruc, A. Berry, P. Masson. (2010). Sound quality assessment of internal automotive road noise using sensory science. Acta Acustica united with Acustica, 96, 580-588. (Published).
• N. Quaegebeur, P. Micheau, P. Masson, A. Maslouhi. (2010). Structural Health Monitoring strategy for detection of interlaminar delamination in composite plates. Smart Mater. Struct., 19, 12 p. (Published).
• P. Masson, R. Halkyard. (2010). Time domain localized structural intensity for damage characterization. Smart Mater. Struct., 19, 14 p. (Published).
• A. Gérard, A. Berry, P. Masson, Y. Gervais. (2009). Experimental validation of tonal noise control form subsonic axial fans using flow control obstructions. J. Sound and Vibration, 321(1), 8-25. (Published).
• M. Couillard, P. Masson, P. Micheau. (2009). Identification of friction parameters for limited relative displacement contacts. Shock and Vibration, 16(5), 481-493. (Published).
• A. Gérard, A. Berry, P. Masson, Y. Gervais. (2009). Modelling of tonal noise control form subsonic axial fans using flow control obstructions. J. Sound and Vibration, 321, 26-44. (Published).
• P. Buaka, P. Micheau, P. Masson. (2009). Nonlinear phase shift control of semi-active friction devices for optimal energy dissipation. J. Sound and Vibration, 320(1-2), 16-28. (Published).
• D. Francoeur, P. Micheau, P. Masson. (2009). Parametric identification of a transmission line model for SHM damage characterization in lap joints. Smart Mater. Struct., 18, 12 p. (Published).

Livres

• H. Douville, P. Masson, A. Berry. (2011). An approach using active structural acoustic control for the reduction of structure-borne road noise LAP Lambert Academic Publishing. (Published).

Rapports

• P. Masson, P. Micheau, A. Maslouhi, N. Quaegebeur, P. Bélanger, M. Viens, L. Lessard, P. Hubert, C. Bescond, S. Kruger, R. Dubé, B. Croteau-Labouly, J. Walter, H. Sohn. (2016). Characterization of guided wave propagation in aircraft structures - Final report - CRIAQ DPHM 501 project. Bombardier Aerospace and L-3 MAS. 78 p.
• P.-C. Ostiguy*, M. H. Sherafat*, D. R. Franca, M. R. Mofakhami, N. Quaegebeur, P. Masson. (2014). Preliminary assessment of the feasibility of wave characterization and manufacturing cost. MEMO ASM-SHM-000-2014-001. Bombardier Aerospace. 95 p.
• P.-C. Ostiguy*, M. R. Mofakhami, N. Quaegebeur, P. Masson. (2014). Test requirements CRIAQ DPHM 501. MEMO ASM-SHM-000-2014-004. Bombardier Aerospace. 16 p.
• N. Quaegebeur, P. Masson, P. Micheau. (2010). Advanced SHM Technologies-Overview - Publication No. DRDC Atlantic CR 2010-118. Defence Research Establishment. 58 p.
• D. Langlois Demers, J. Pinsonnault, N. Quaegebeur, P. Masson. (2010). Bombardier Aerospace preliminary list of test articles for CRIAQ 501 project. MEMO. Bombardier Aerospace. 97 p.
• N. Quaegebeur, P. Micheau, P. Masson. (2010). CRIAQ DPHM 410 - Sensitivity and detectability of disbonds using piezoceramics generated guided waves. Bombardier Aerospace. 68 p.
• M. Cardinal, H. Bélanger, N. Quaegebeur, P. Masson. (2010). Report for identification and classification of CF-18 locations of interest for Structural Health Monitoring (Reduced Version). Doc. no. RDB-000-0008. L-3 Communications MAS (Canada) Inc.. 60 p.

Articles de conférence

• N. Bouslama*, N. Quaegebeur, A. Maslouhi, P. Masson. (2020). Comparison of non-destructive techniques in plain weave carbon fiber reinforced polymers under fatigue loading. SHM-NDT 2020. (Submitted).
• F. Moreau, J. Pelletier, C. Cayer, M.-P. Sirois, M. Lemieux, P. Masson, N. Quaegebeur, M.-C. Battista, S. Lemaire-Paquette, M.-P. Garant. (2020). Contrast enhanced transcranial ultrasound imaging of large vessel occlusions in acute stroke: a model of image guidance for focused ultrasound sonothrombolysis. ESO-WSO 2020. (Submitted).
• M. Bilodeau*, N. Quaegebeur, A. Berry, P. Masson. (2020). Correlation-based phase imaging for ultrasound-guided regional anesthesia applications. IEEE Int. Ultrasonics Symposium 2020. (Accepted).
• P. Masson, N. Quaegebeur. (2020). Correlation-based ultrasound imaging in NDT and SHM. SHM-NDT 2020. (Submitted).
• G. Le Moign*, N. Quaegebeur, P. Masson, O. Basset, H. Liebgott. (2020). Optimal virtual sources distribution for coherent compounding method in 2D and 3D echography. IEEE Int. Ultrasonics Symposium 2020. (Accepted).
• F. Mainguy, H. Douville, P. Masson, N. Quaegebeur. (2020). Potential of Excitelet Focusing Method (XFM) for Next-Generation Instrumentation. 20th World Conference on Non-Destructive Testing. (Submitted).
• H. Hariri*, P. Masson, L. Fréchette. (2020). Road noise reduction inside car cabin using active structural acoustic control (ASAC). ACTUATOR 2020. (Submitted).
• P. Micheau, V. Serey*, P. Masson, N. Quaegebeur, M. Castaings, M. Renier. (2019). Active control of velocity field in a composite structure. 6th International Conference on Control, Decision and Information Technologies. (Published).
• F. Morandi*, O. Robin, L. Barbaresi, M. Garai, N. Quaegebeur, N. Atalla, P. Masson. (2019). Benchmarking of methods for the identification of flexural wavenumbers in wooden plates. 23rd International Congress on Acoustics. (Accepted).
• P. Micheau, V. Serey*, N. Quaegebeur, P. Masson, M. Castaings, M. Renier. (2019). Experimental study of velocity field synthesis in an adhesively-bonded joint. 26th International Congress on Sound and Vibration. (Published).
• Y. Keshmiri Esfandabadi*, P. Masson. L. De Marchi. (2019). Laplacian wavenumber filtering for improving damage visualization in fast non-contact inspections. Proceedings of meetings on acoustics Acoustical Society of America, 38(1). (Published).
• P. Danakas*, N. Quaegebeur, P. Masson. (2019). Modelling of cam-follower concept for broadband air-coupled power ultrasound transducer. 27th CANCAM. (Accepted).
• F. Morandi, L. Barbaresi, M. Caniato, A. Gasparella, O. Robin, P. Masson, N. Atalla. (2019). Modelling the sound insulation of mass timber floors using the finite transfer matrix method. 4th Building Simulation Applications Conference. (Published).
• G. Le Moign*, N. Quaegebeur, P. Masson, M. Robini, O. Basset, H. Liebgott. (2019). Optimization of the virtual sources distribution in 3-D echography. IEEE International Ultrasonics Symposium 2019. (Accepted).
• V. Serey*, N. Quaegebeur, P. Micheau, P. Masson, M. Castaings, M. Renier. (2019). Sélectivité modale d’ondes ultrasonores dans des guides d’ondes de section finie à l’aide d’éléments piézoélectriques intégrés pour le SHM. Journée Jeunes Chercheurs en Acoustique Physique. (Published).
• M. Bilodeau*, N. Quaegebeur, O. Robin, P. O’Donoughue*, P. Masson, A. Berry. (2019). Time domain phase coherence based algorithm for impact source reconstruction. Inter-Noise 2019. (Published).
• Y. Keshmiri Esfandabadi*, M. Bilodeau*, P. Masson. L. De Marchi. (2019). Ultrasonic guided wave dataset for super-resolution reconstruction of images from compressed wavefield acquisition. 12th International Workshop on SHM. (Accepted).
• V. Serey*, N. Quaegebeur, P. Micheau, P. Masson, M. Castaings, M. Renier. (2018). Décomposition modale d’un champ ultrasonore complexe dans un guide bidimensionnel pour la génération sélective de modes guidés. Congrès Français d’Acoustique 2018. (Published).
• P. Masson, N. Quaegebeur, M. H. Sherafat, L. Lessard, P. Hubert. (2018). Experimental assessment of guided waves far-field scattering around damage in metallic and composite structures. Acoustical Society of America meeting. (Published).
• M. H. Sherafat*, N. Quaegebeur, P. Hubert, L. Lessard, P. Masson. (2018). Experimental model of impact damage for guided wave-based inspection of composites. QNDE 2018. (Published).
• M. Bilodeau*, N. Quaegebeur, A. Berry, P. Masson. (2018). Phase coherence imaging of vibroacoustic sources. BeBeC 2018. (Published).
• P. Chouinard*, M.-A. Bégin*, J. M. Fortin*, A. Berry, P. Masson, J.-S. Plante. (2018). Preventing lower back pain among truck drivers: Design and performance of a controlled slippage magnetorheological actuator for an active seat suspension. ASME 2018 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2018). (Published).
• V. Serey*, M. Bilodeau*, N. Quaegebeur, P. Micheau, P. Masson, M. Renier, M. Castaings. (2018). Selective generation of guided modes along bar-like composite structures. 7th Asia Pacific Workshop on SHM. (Published).
• V. Serey*, N. Quaegebeur, P. Micheau, P. Masson, M. Castaings, M. Renier. (2018). Selective guided waves generation in a two-dimensional waveguide. 9th European Workshop on SHM. (Published).
• M. Mbina*, R. Gagné, P. Masson, J. Rhazi, N. Quaegebeur. (2018). Évaluation non destructive de la qualité de l’adhérence entre deux bétons par une nouvelle approche d’analyse développée de la méthode de la réponse impulsionnelle. Journées Scientifiques du Regroupement Francophone pour la Recherche et la Formation sur le Béton. (Published).
• J. Moriot*, N. Quaegebeur, A. Le Duff, P. Masson. (2017). A model-assisted probability of detection approach for assessing ultrasonic structural health monitoring imaging methods. NDT in Canada 2017 Conference. (Published).
• M. Bilodeau*, N. Quaegebeur, P. Masson. (2017). Direct imaging approach for relative phase identification of vibro-acoustic sources. NDT in Canada 2017 Conference (Best poster award). (Published).
• N. Quaegebeur, N. Bouslama*, M. Bilodeau, P. Masson, A. Maslouhi, P. Micheau. (2017). Guided waves scattering by a geometrical feature: application to fatigue and machined cracks. SPIE - Smart Structures/NDE. (Published).
• J. Moriot*, N. Quaegebeur, A. Le Duff, P. Masson. (2017). Model-assisted assessment of imaging guided wave-based Structural Health Monitoring method for detecting a damage on a composite honeycomb H-stab. 11th International Workshop on SHM. (Published).
• V. Serey*, M. Castaings, P. Micheau, M. Renier, P. Masson, N. Quaegebeur. (2017). Selective guided waves generation in a bi-dimensional waveguide for damage detection. NDT in Canada 2017 Conference. (Published).
• V. Serey*, M. Castaings, P. Micheau, M. Renier, P. Masson, N. Quaegebeur. (2017). Selective guided waves generation in a bi-dimensional waveguide for damage detection. 11th International Workshop on SHM. (Published).
• N. Quaegebeur, P. Masson, N. Beaudet, P. Sarret. (2017). Touchscreen surface based on interaction of ultrasonic guided waves with a contact impedance. SPIE - Smart Structures/NDE. (Published).
• M. H. Sherafat*, N. Quaegebeur, L. Lessard, P. Hubert, P. Masson. (2017). Ultrasonic guided wave propagation in hybrid assemblies. CANCOM2017. (Published).
• M. Mbina*, R. Gagné, P. Masson, J. Rhazi, N. Quaegebeur. (2017). Évaluation non-destructive de la qualité de l’adhérence entre deux bétons par la méthode de la réponse impulsionnelle (RI). Journées Scientifiques du Regroupement Francophone pour la Recherche et la Formation sur le Béton. (Published).
• P.-C. Ostiguy*, N. Quaegebeur, P. Masson. (2016). Assessment of correlation-based imaging technique on composites. 8th European Workshop on SHM. (Published).
• J. Moriot*, N. Quaegebeur, P.-C. Ostiguy*, A. Le Duff, P. Masson. (2016). Caractérisation de la performance et de la robustesse des techniques d'imagerie par ondes guidées. Congrès Français d'Acoustique 2016. (Published).
• P. Micheau, R. Guitel*, N. Quaegebeur, P. Masson. (2016). Génération sélective d’ondes guidées à l’aide de transducteurs co-localisés. Congrès Français d'Acoustique 2016. (Published).
• P. Masson, N. Quaegebeur, F. Mainguy. (2016). Implantation efficace de l’acquisition pleine matrice en imagerie ultrasonore temps réel. Congrès Français d'Acoustique 2016. (Published).
• J. Moriot*, N. Quaegebeur, A. Le Duff, P. Masson. (2016). Model-assisted probability of localization curves for characterizing damage imaging techniques in structural health monitoring. 8th European Workshop on SHM. (Published).
• N. Bouslama*, A. Maslouhi, S. Jazouli, P. Masson. (2016). Progressive failure analysis in post-buckled CFRP stiffened panel. ECCM17 - 17th European Conference on Composite Materials. (Published).
• M. H. Sherafat*, N. Quaegebeur, L. Lessard, P. Hubert, P. Masson. (2016). Ultrasonic guided wave propagation in hybrid assemblies. Composite Materials and Structures @ Canada 2016. (Published).
• R. Guitel*, N. Quaegebeur, P. Micheau, P. Masson. (2015). Clamped piezoelectric movable transducer for robust and selective guided wave mode generation. CanSmart 2015 / SMN 2015. (Published).
• M. H. Sherafat*, R. Guitel*, N. Quaegebeur, L. Lessard, P. Hubert, P. Masson. (2015). Disbond detection in a composite skin-stringer assembly using Lamb wave propagation. 10th International Workshop on SHM. (Published).
• P. Masson and N. Quaegebeur. (2015). Efficient implementation of Full-Matrix Capture in real-time ultrasonic damage imaging. NDT in Canada 2015 Conference. (Published).
• A. B. Desbiens*, J.-S. Plante, P. Masson. (2015). Experimental characterization of a meso-scale combustion driven actuators designed for high efficiency. ASME/IEEE Int. Conf. Mechatronics and Embedded Syst. and Applications. (Published).
• N. Bouslama*, A. Maslouhi, P. Masson. (2015). Fatigue crack growth threshold determination in aluminum structure. America’s Conference on Aluminum Alloys. (Published).
• P. Masson, N. Quaegebeur, P.-C. Ostiguy*, P. Y. Moghadam*. (2015). Improving robustness of damage imaging in model-based structural health monitoring of complex structures. Acoustical Society of America meeting. (Published).
• L.-P. Brault* N. Quaegebeur, P. Masson, N. Beaudet, P. Sarret. (2015). Low-cost touchscreen technology based on guided wave reflection. CanSmart 2015 / SMN 2015. (Published).
• P.-C. Ostiguy*, N. Quaegebeur, P. Masson. (2015). Non-Destructive Evaluation of coating thickness using guided waves. 9437, 94371K (11pp.). (Published).
• P. Y. Moghadam*, N. Quaegebeur, P. Masson. (2015). Optimal excitation of piezoelectric transducer array for mode-selective guided wave generation. CanSmart 2015 / SMN 2015. (Published).
• A. Le Duff, N. Quaegebeur, P.-C. Ostiguy*, P. Masson. (2015). Precision of imaging algorithm based on ToF estimation of guided waves: experimental assessment. CanSmart 2015 / SMN 2015. (Published).
• P.-C. Ostiguy*, M. H. Sherafat*, D. R. Franca, N. Bouslama*, N. Quaegebeur, A. Maslouhi, L. Lessard, P. Hubert, M. Viens, M. R. Mofakhami, Z. Hajjar, P. Masson. (2015). Selection of structural features for the systematic study of guided wave propagation and interaction with damage. 10th International Workshop on SHM. (Published).
• P.-C. Ostiguy*, N. Quaegebeur, P. Masson. (2015). Semi-analytical modelling of guided waves generation on composite structures using circular piezoceramics. SPIE – Smart Structures/NDE. (Published).
• Y. Pasco, T. Guedeney*, A. Leung-Tack*, A. Berry, S. Moreau, P. Masson. (2014). Active noise control of tonal turbofan noise in aero engines. ISROMAC-15. (Published).
• P.C. Ostiguy*, N. Quaegebeur, P. Masson. (2014). Damage detection, localization and size estimation using broadband correlation-based imaging. 7th European Workshop on SHM. (Published).
• M. Cardinal*, P. Masson. (2014). Fully-coupled 6 DoF model and sensitivity analysis of the SA160 general aviation aircraft. AIAA Science and Tech. Forum and Exposition. (Published).
• M.H. Sherafat*, N. Quaegebeur, L. Lessard, P. Hubert, P. Masson. (2014). Guided wave propagation through composite bonded joints. 7th European Workshop on SHM. (Published).
• P.C. Ostiguy*, N. Quaegebeur, P. Masson. (2014). Improved damage imaging in aerospace structures using a piezoceramic hybrid pin-force wave generation model. SPIE - Smart Structures/NDE. (Published).
• A. Le Duff, N. Quaegebeur, P.C. Ostiguy*, P. Masson. (2014). Precision of Imaging algorithms based on ToF estimation of guided waves. 7th European Workshop on SHM. (Published).
• N. Quaegebeur, P.C. Ostiguy*, P. Masson. (2014). Use of two-dimensional stress in the modelling of guided wave generation by circular piezoceramics. 7th European Workshop on SHM. (Published).
• K. Mulligan*, N. Quaegebeur, P. Masson. (2013). A novel signal compensation algorithm for piezoceramic degradation in damage imaging for structural health monitoring. CanSmart/CINDE/IZFP 2013. (Published).
• K. Mulligan*, N. Quaegebeur, P. Masson, S. Létourneau. (2013). Correction of data gathered by degraded transducers for damage prognosis in composite structures. Conference of the Prognostics and Health Management Society. (Published).
• N. Quaegebeur, P.-C. Ostiguy*, P. Masson. (2013). Correlation-based imaging algorithm for bolt loosening monitoring on realistic aerospace structure. 9th International Workshop on SHM. (Published).
• P. Masson, N. Quaegebeur, A. Brunel*, N. Mrad. (2013). Implementation of a novel imaging technique in an existing structural health monitoring system. SPIE – Smart Structures/NDE. (Published).
• P. Masson. (2013). Increasing the robustness in damage imaging. International Symposium on SHM and NDT. (Published).
• A. Gérard*, R. Oddo, M. Pearson, A. Amyotte*, P. Masson, F. Sgard, A. Berry. (2013). Industrial fan foise control using flow obstructions. International Congress on Acoustics 2013. (Published).
• P. Y. Moghadam*, N. Quaegebeur, P. Masson. (2013). Piecewise semi-analytical modeling of guided wave generation by piezoelectric transducers. CanSmart/CINDE/IZFP 2013. (Published).
• N. Quaegebeur, P. Masson, L.-P. Brault*, N. Beaudet, P. Sarret. (2013). Pressure mapping system based on guided waves reflection. International Congress on Acoustics 2013. (Published).
• N. Quaegebeur, P. Masson, L.-P. Brault*, N. Beaudet, P. Sarret. (2013). Pressure mapping system based on guided waves reflection. SPIE – Smart Structures/NDE. (Published).
• A. Gérard*, S. Moreau, A. Berry, P. Masson. (2012). Acoustic modulation effect of rotating stator/rotor interaction noise. Acoustics 2012. (Published).
• W. Belgacem*, P. Masson, A. Berry. (2012). Active structural control on a car for cancellation of road noise disturbance. Inter-Noise 2012. (Published).
• R. Mohamed*, P.M. Yazdanpanah*, P. Masson. (2012). A generalized equivalent loading model for piezoelectric elements. 6th European Workshop on SHM. (Published).
• P.-C. Ostiguy*, N. Quaegebeur, P. Masson. (2012). Assessment of the Excitelet algorithm for in situ mechanical characterization of orthotropic structures. SPIE – Smart Structures/NDE. (Published).
• K.R. Mulligan*, N. Quaegebeur, P. Masson, S. Létourneau. (2012). Correction of data gathered by degraded transducers for damage prognosis in composite structures. Proceedings of the Annual Conference of the Prognostics and Health Management Society 2012 (PHM 2012). V3, 103-110. (Published).
• P.-C. Ostiguy*, N. Quaegebeur, P. Masson. (2012). In situ damping characterization for improved imaging in structural health monitoring. 6th European Workshop on SHM. (Published).
• N. Quaegebeur, P. Micheau, P. Masson. (2012). SHM system using rectangular versus circular piezoceramic for the inspection within the bond of a composite bonded joint. SPIE – Smart Structures/NDE. (Published).
• A. Gérard*, A. Berry, P. Masson. (2012). Semi-active method to control tonal noise from fans. Inter-Noise 2012. (Published).
• N. Quaegebeur, P. Micheau, P. Masson. (2012). Within-the-bond strategy for in situ inspection of composite bonded joint using piezoceramics. 6th European Workshop on SHM. (Published).
• K. Mulligan, P. Masson, S. Létourneau, N. Quaegebeur. (2011). An approach to compensate for the degradation of the monitoring system in damage detection. CanSmart/CINDE/IZFP 2011. (Published).
• P. Masson, N. Quaegebeur, D. Langlois Demers. (2011). A novel imaging technique for structural health monitoring using sparse and compact arrays. SPIE – Smart Structures/NDE. (Published).
• R. Mohamed, D. Langlois Demers, P. Masson. (2011). A parametric study of piezoceramic thickness effect on the generation of fundamental Lamb modes. SPIE – Smart Structures/NDE. (Published).
• K. Mulligan, P.-C. Ostiguy, P. Masson, S. Elkoun, N. Quaegebeur. (2011). Assessment of PZT transducer bonding techniques under drop-weight impact loading in composites. SPIE – Smart Structures/NDE. (Published).
• P. Masson, N. Quaegebeur, G. Vézina, A. Brunel, P. Micheau, P. Masson, N. Mrad. (2011). Assessment of novel imaging technique for commercial structural health monitoring and NDT systems. CanSmart/CINDE/IZFP 2011. (Published).
• R. Mohamed, P. Masson. (2011). A time domain spectral element for coupled piezoelectric actuator/sensor with complex thin-walled assembly structures. 8th International Workshop on SHM. (Published).
• K. Mulligan, P. Masson, S. Létourneau. (2011). Development of data mining based prognostic models for condition monitoring of carbon fibre coupons. Conference of the Prognostics and Health Management Society. (Published).
• N. Quaegebeur, P. Masso. (2011). Experimental broadband estimation of guided waves group velocity with high signal to noise ratio. 8th International Workshop on SHM. (Published).
• T.T. Trân Thanh, F. Michaud, C. Bellemare, M. Martin, P. Masson, C.T. Le Dinh, D. Létourneau, P. Moisan, R. Lemieux. (2011). Improved user interface for a robotized camera system providing infinite number of viewpoints for telecoaching emergency procedures. Computer Assisted Radiology and Surgery (CARS) 2011. (Published).
• P.-C. Ostiguy, P. Masson, N. Quaegebeur, S. Elkoun. (2011). Sensitivity of the Excitelet imaging algorithm on material properties for isotropic structures. 8th International Workshop on SHM. (Published).
• N. Quaegebeur, P. Micheau, P. Masson, A. Maslouhi. (2011). Strategy for detection of interlaminar delamination in composite plates. SPIE – Smart Structures/NDE. (Published).
• N. Quaegebeur, P. Micheau, P. Masson, H. Bélanger. (2011). Structural health monitoring of bonded composite joints using piezoceramics. CanSmart/CINDE/IZFP 2011. (Published).
• R. Mohamed, P. Masson. (2011). Time domain spectral element fast solver for piezoelectric structures. CanSmart/CINDE/IZFP 2011. (Published).
• Masson, P., Micheau, P. (2009). Compact piezoelectric arrays for imaging strategies in damage detection. Proceedings of the 7th International Workshop on Structural Health Monitoring, 1256-1263. (Published).
• Y. Pasco, P. Masson. (2009). Modelling of piezoelectric fiber composite material for ultrasonic wave generation. CanSmart 2009. (Published).
• J. Dion, P. Masson, J.J. Dubowski. (2009). Rapid microstructuring of photosensitive glass with an ArF excimer laser projection patterning technique. 10th Int. symp. Laser Precision Microfabrication. (Published).
• P. Masson. (2009). Sensing requirements for damage prognosis in aerospace structures. Photonics North. (Published).
• S. Debeaux, P. Masson, L. Fréchette. (2009). Strain-based energy harvesting for structural health monitoring. CanSmart 2009. (Published).

Propriétés intellectuelles

Patents

• P. Masson, N. Quaegebeur, P.-C. Ostiguy*, N. Beaudet, P. Sarret. (2017). Active acoustic pressure mapping system. WO 2014019075 A1. United States. (Granted/Issued).
• P. Masson, P. Micheau, N. Quaegebeur, D. Langlois Demers*. (2017). Method and apparatus for providing a structural condition of a structure. WO 2011106890 A1. Canada. (Granted/Issued).
• A. Gérard*, A. Berry, P. Masson, Y. Gervais, M. Besombes. (2014). Method and apparatus for controlling tonal noise from subsonic fans. US 8777560 B2. Canada. (Granted/Issued).
• B. Paillard, J. Mazoyer*, P. Masson, A. Berry, A. Albert. (2008). Active seat suspension. US 20060237885 A1. Canada. (Granted/Issued).
• N. Quaegebeur, P. Masson, A. Berry, C. Ardin, P.-M. D'Anglade. System and method for non-destructive quality control of cardboard laminates. US 62/465,968. United States. (Pending).

Licenses

• Pressure mapping system. (2018). (Granted).
• Excitelet ultrasound imaging. (2015). (Granted).
• Tactile shelves and floors used for inventory management and customer behavioral analysis purposes. (In Negotiation).

Autres contributions

Cours enseignés

• Project in mobile robotics. GRO 302. (2018-04-30). Niveau : Undergraduate. (2CR).
• Professional skills for PhD students (workshop on Professor career). EFD 901/911/951. (2010-09-01). Niveau : Graduate. (3CR).
• Structural Health Monitoring for aerospace structures. GMC 724. (2010-05-01 à 2016-12-20). Niveau : Graduate. (3CR).
• Active Noise and Vibration Control. GMC 723. (2005-09-01).
• Mechatronics I. IMC 325. (2000-01-01). Niveau : Undergraduate. (3CR).
• Project of Mechatronics. IMC 455. (2000-01-01). Niveau : Undergraduate. (3CR).

Gestion d'évènements

• Technical Chair. (2020). Acoustics Week in Canada 2020. (Conference).
• Technical Committe Member. (2020). SHM-NDT 2020 - Structural Health Monitoring and Non-Destructive Testing. (Conference).
• Technical Track Chair. (2019). IWSHM 2019 - 12th International Workshop on Structural Health Monitoring, Stanford, USA. (Conference).
• Scientific Committee Member. (2018). APWSHM 2018 - 7th Asia-Pacific Workshop on Structural Health Monitoring, Hong Kong. (Conference).
• Scientific Committee Member. (2017). 9th International Symposium on NDT in Aerospace, Xiamen, China. (Conference).
• Technical Committee Member. (2016). 8th International Symposium on NDT in Aerospace, Bangalore, India. (Conference).
• Technical Track Chair. (2015). IWSHM 2015 - 10th International Workshop on Structural Health Monitoring, Stanford, USA. (Conference).
• Technical Committee Member. (2015). SMN 2015 - 5th International Conference on Smart Materials and Nanotechnology in Engineering, Vancouver, Canada. (Conference).
• Technical Committee Member. (2014). EWSHM 2014 - 7th European Workshop on Structural Health Monitoring, Nantes, France. (Conference).
• Technical Committee Member. (2013). CanSmart/CINDE 2013 - International Workshop on Smart Materials, SHM and NDT for Energy Industry, Calgary, Canada. (Conference).
• Technical Track Chair. (2013). IWSHM 2013 - 9th International Workshop on Structural Health Monitoring, Stanford, USA. (Conference).
• Technical Committe Member. (2013). CIRI 2013 - 3ème Congrès International sur l’Ingénierie des Risques Industriels, Reims, France. (Conference).
• Chair. (2013). 1st UdeS SHM/NDT Workshop, Sherbrooke, Canada. (Workshop).
• Technical Committee Member. (2011). CanSmart/CINDE 2011 - International Workshop on Smart Materials, Structures and NDT in Aerospace, Montréal, Canada. (Conference).
• Technical Track Chair. (2011). IWSHM 2011 - 8th International Workshop on Structural Monitoring, Stanford, USA. (Conference).
• Technical Track Chair. (2009). IWSHM 2009 - 7th International Workshop on Structural Health Monitoring, Stanford, USA. (Conference).
• Technical Program Chair. (2009). ACTIVE 2009, Ottawa, Canada. (Conference).
• Technical Track Chair. (2009). CANEUS Fly-by-Wire Workshop 2009, Montréal, Canada. (Conference).

Activités de collaboration internationale

• Co-supervisor. (2018-2020). France. I am co-supervising Goulven Le Moign for a thesis in co-tutelle with the Université de Lyon. This thesis is conducted within the "Laboratoire International Associé" in Acoustics between the Université de Lyon and the Université de Sherbrooke and partly funded by the CNRS in France.
• Academic advisor. (2018). Italy. I am an academic advisor for the thesis work of Yasamin Keshmiri at the University of Bologna. She spent ten months in my laboratory.
• Co-supervisor. (2015-2018). France. I co-supervised Valentin Serey for a thesis in co-tutelle with the Université de Bordeaux.
• Academic advisor. (2018). Italy. I was an academic advisor for Federica Morandi during a research internship in my laboratory as part of her post-doctoral fellowship at the University of Bologna.
• Inviting professor. (2017). France. Hosted Professor Alain Le Duff for a short sabbatical leave from ESEO, France, for collaborative work in my laboratory.
• Inviting professor. (2017). France. Hosted Professor Michel Castaings for a short sabbatical leave from Université de Bordeaux (I2M), France, for collaborative work in my laboratory.
• Co-supervisor. (2015-2017). France. I co-supervised Jérémy Moriot, a post-doctoral fellow working in collaboration with Université du Maine (Le Mans).
• Inviting professor. (2012-2016). Korea, Republic of. I led a CRIAQ project where Professor Hoon Sohn from Korea Advanced Institute for Science and Technology (KAIST) was collaborating. I hosted Professor Sohn for a short sabbatical leave in 2014 for collaborative work in my laboratory.
• Co-supervisor. (2014). United States. My student Peyman Yazdanpanah Moghadam spent a four-month internship at GeorgiaTech under the co-supervision of Professor Massimo Ruzzene. A piezoelectric transducer was designed.
• Supervisor. (2001-2013). France. I have welcomed a number of trainees from ECAM, Lyon, France over the past years. This has been conducted within informal collaborative projects.
• Inviting professor. (2012-2013). France. Hosted Professor Alain Le Duff on sabbatical leave from ESEO, France, for collaborative work in my laboratory.
• Inviting professor. (2013). France. Hosted Professor Michel Castaings from Université de Bordeaux (I2M), France, for a short stay, for collaborative work on the project CRIAQ DPHM 501 I was leading.
• Inviting professor. (2012-2013). France. Hosted Professor Roger Halkyard on sabbatical leave from The University of Auckland, New Zealand, for collaborative work in my laboratory.
• Invited professor. (2007-2008). New Zealand. Sabbatical leave at The University of Auckland, working in collaboration with Roger Halkyard.

Présentations

• P. Masson. (2015). Aerospace projects at GAUS. Cross the Experience DEMA Workshop. Montreal, Canada.
• P. Masson, N. Quaegebeur, P.-C. Ostiguy*, M. Viens, L. Lessard, A. Maslouhi. (2014). Project DPHM 501 - Characterization of guided wave propagation in aerospace structures - Video and poster presentation. CRIAQ 7th Forum - Presentations of selected projects. Montreal, Canada.
• P. Masson, N. Quaegebeur, K. Mulligan*, P.-C. Ostiguy*, P. Y. Moghadam*, R. Mohamed*, L.-P. Brault*, A. LeDuff. (2014). Robustness of piezoelectric-based structural health monitoring. CREATE-ISS Symposium. Sherbrooke, Canada.
• P. Masson, P.-C. Ostiguy*, N. Quaegebeur. (2013). Excitelet - A correlation-based Imaging algorithm for Structural Health Monitoring. SHM-in-Action - IWSHM 2013 - 9th International Workshop on Structural Health Monitoring. Stanford, United States.