Aller au contenu

Inès Esma Achouri

ing., Ph. D.
Professeure adjointe

Titulaire de la Chaire de Recherche du Canada en intensification des procédés pour catalyseurs avancés et énergie durable

Coordonnées

Diplômes

  • Baccalauréat Génie des Procédés, spécialité procédés Pharmaceutiques, Université Constantine 3 et Université Laarbi Ben M’hidi, Algérie (2008)
  • Master Ingénierie Biomédicale et Pharmaceutique, Université Claude Bernard Lyon 1, France (2009)
  • Doctorat en Génie Chimique, Université de Sherbrooke (2015)
  • Chercheure postdoctorale, École Polytechnique de Montréal (2018)

Domaines d'expertises et de recherche

Intensification des procédés chimiques et pharmaceutiques; Efficacité énergétique; Catalyseurs hétérogènes, Procédé assisté par plasma froid; Conversion catalytique.

Activités de recherche

  • Développement de matériaux efficaces pour la production d’énergie
  • Développement et optimisation de procédés à haute efficacité énergétique
  • Développement de techniques d’opération en continu

Activités d'enseignement

  • GBT415 Projet d'intégration I
  • GBT416 Projet d'intégration II
  • GCH328 Conception d'unités
  • GCH330 Laboratoire physicochimique

Communications scientifiques

  •  

1.1 Articles publiés dans des revues avec comités de révision

  • I.M. Malik, N. Abatzoglou; I.E. Achouri* (2021). Methanol to Formaldehyde: An Overview of Surface Studies and Performance of an Iron Molybdate Catalyst. Catalysts, 11(8), 893. (IF 4)
  • A. Ly; I.E. Achouri; R. Gosselin; N. Abatzoglou (2021). Wet granulation end point prediction using dimensionless numbers in a mixer torque rheometer: Relationship between capillary and Weber numbers and the optimal wet mass consistency. International Journal of Pharmaceutics, 605, 120823.(IF 5.9)
  • I.E. Achouri*; J. Chaouki; N. Abatzoglou. Methods of coating ceramic supports with carbon and Ni-Based catalytically active formulations. (2021). Canadian Journal of Chemical Engineering. (IF 2)
  • O. Chaib; I. E. Achouri; R. Gosselin; N. Abatzoglou. Gravity mass powder flow through conical hoppers ‐ Part I: A mathematical model the radial velocity profiles of free-flowing granular systems as a function of cohesion and adhesion properties. (2021). Canadian Journal of Chemical Engineering. (IF 2)
  • O. Chaib; I. E. Achouri; R. Gosselin; N. Abatzoglou. Gravity mass powder flow through conical hoppers ‐ Part II: A mathematical model predicting the axial and radial profiles of normal stresses from flow velocity measurements. (2021). Canadian Journal of Chemical Engineering. (IF 2)
  • I.E. Achouri*; A. Rhoden; S. Hudon; R. Gosselin; J-S. Simard; N. Abatzoglou. Non-invasive sensing technologies applicable for pharmaceutical lyophilized products: a review (2020). Talanta Journal (IF 6.1)
  • A. Ly; I.E. Achouri; R. Gosselin; N. Abatzoglou. Rheological behavior of porous pharmaceutical materials: linking torque profiles during wet massing to water diffusion coefficients and penetration time. (2020). Chemical Engineering & Processing: Process Intensification (IF 4.23)
  • S. Belbassai; I.E. Achouri; N. Abatzoglou. Toluene steam reforming using nickel-based catalysts made from mining residues. (2020). Catalysis Today, Special Edition (invited paper) (IF 6.8)
  • N. Braidy ; S. Bastien ; J. Blanchard ; C. Fauteux-Lefebvre ; I. E. Achouri; N. Abatzoglou. (2017). Activation mechanism and microstructural evolution of a YSZ/Ni-alumina catalyst for dry reforming of methane. Catalysis Today vol. 291, p. 99-105. (IF 6.8)
  • J. Blanchard; I.E. Achouri; N. Abatzoglou. (2016). H2S poisoning of NiAl2O4-YSZ catalyst during methane dry reforming. The Canadian Journal of Chemical Engineering. Special Edition vol. 94, p. 650-654. (IF 2)
  • I.E. Achouri ; N. Abatzoglou ; N. Braidy ; S. Bastien. (2015). New insight on the role of YSZ in a NiAl2O4/Al2O3-YSZ catalyst. Applied Catalysis A: General vol. 497, p. 42-50. (IF 5.7)
  • I.E. Achouri ; N. Abatzoglou ; C. Fauteux-Lefebvre ; N. Braidy (2013). Comparison of two nickel aluminate catalysts prepared by wet-impregnation and coprecipitation. Catalysis Today vol. 207, p. 12-20. (IF 6.8).
  • C. Fauteux-Lefebvre; N. Abatzoglou; N. Braidy; I. E. Achouri. (2011). Diesel steam reforming with a nickel–alumina spinel catalyst for solid oxide fuel cell applications. Journal of Power sources (IF 8.2)

1.2 Journal proceedings

  • M. I Malika, K. Bechwaty, F.Guitzhofer, I.E. Achouri*. (2021). Ozone sterilization of N95 masks. PSE Press - CSChE Systems &Control. Canadian Chemical Engineering Conference, Montréal, Canada
  • I.E. Achouri; J. Chaouki; N. Abatzoglou. (2019). Ni-Al spinel catalyst deposition on carbon coated silicon oxide support. AIChE Academy (vol. 36h).
  • J-F. Dufault; I. E. Achouri; N. Abatzoglou; N. Braidy; L. Fréchette; M. Picard. (2018) Fabrication and demonstration of planar microreactors for solar steam methane reforming. Journal of Physics Conference Series. (Vol. 1052, No. 1, p. 012055). IOP Publishing.
  • N. Abatzoglou; J. Blanchard; I.E. Achouri. (2014). A novel Ni-Al spinel-based catalyst for dry reforming of CH4-rich gasification tail gas streams. 22nd European Biomass Conference and Exhibition (pp. 1004-1007). Hamburg: ETA Florence Renewable Energies.

1.3 International conference oral presentations

  • I.E. Achouri, F. Farzi. (Dec. 2021). New venues for Direct hydrogenation of CO2. The International Chemical Congress of Pacific Basin Societies, Hawai, United States (Virtual)
  • I.E. Achouri, F. Farzi, M. I. Malik (Nov. 2021). Negative value materials for CO2 utilisation. American Institute of Chemical Engineers Annual Meeting, Boston, MA (vitual)
  • I.E. Achouri; N. Abatzoglou; J. Chaouki. Nov. 2019. Methods of Coating Ceramic Supports with Carbon in the Case of Supported Ni-Based Catalysts Formulations. American Institute of Chemical Engineers Annual Meeting, Orlando, FL.
  • S. Belbessai; I.E. Achouri; N. Abatzoglou. Mai 2019. (Invited talk) A new catalyst for the conversion of aromatics to HC and CO-rich gas. 4th Edition of International Conference on Catalysis and Green Chemistry, Tokyo.
  • I.E. Achouri; Abdoulah Ly; N. Abatzoglou (Mars 2019) A PAT-based experimental study of wet granulation process for pharmaceutical applications. The International Foundation Process Analytical Chemistry IFPAC annual meeting. Washington, DC.
  • J-F Dufault; I. E. Achouri; Nicolas Abatzoglou; Nadi Braidy; Luc G. Fréchette; Mathieu Picard. Highly integrated solar micro-reactor for cheap hydrogen synthesis via steam methane reforming (Nov 2017) Power MEMS: The 17th international Conference on Micro and Nanotechnology for power generation and energy conversion application, Japan.
  • I.E. Achouri; N. Abatzoglou; N. Braidy (Mar 2015) New insight on the role of YSZ in a NiAl2O4/Al2O4-YSZ diesel steam reforming catalyst. 249th America Chemical Society national meeting, Denver, CL.
  • I.E. Achouri; N. Braidy; N. Abatzoglou; (Aug 2015) Effect of Yttria content on YSZ oxygen conductivity and USZ interaction with alumina as a reforming catalyst co-support. 250th America Chemical Society national meeting, Boston, MA.

1.4 Canadian oral presentations

  • I. E. Achouri (Keynote speaker). (Mai 2022) Direct CO2 hydrogenation with low-cost catalysts: comparing traditional techniques with cold plasma assisted technique. 26th Canadian Symposium on Catalysis. Vancouver.
  • A. Ly, I. E. Achouri, Nicolas Abatzoglou, Ryan Gosselin. (Oct 2021). Relationship between the capillary number and the optimal wet mass consistency developed in a Mixer Torque Rheometer for the wet granulation end point prediction. 71st Canadian Chemical Engineering Conference, Montreal, Canada
  • M. I. Malik, I.E. Achouri. (2021). A brief review on Recent Developments of Microwave Plasma applications in Dry Reforming of Methane. 71st Canadian Chemical Engineering Conference, Montréal, Canada
  • I. E. Achouri (session organizer). (October 2020). Renewable Energy session, division of environment and natural resources. 70th edition of the Canadian Conference of Chemical Engineering. Ottawa.
  • A. Ly; I. E. Achouri; et al (2020). Wet granulation end-point prediction using dimensionless numbers. Canadian Chemical Engineering Conference, Canada (virtual)
  • W. Roy; I. E. Achouri; et al. (2020). Dry Coating of Pharmaceutical Excipients using a Conical Mill. Canadian Chemical Engineering Conference, Canada (virtual)
  • A. Ly; I. E. Achouri; R. Gosselin; N. Abatzoglou. (Oct 2019) Estimation of water’s coefficients of diffusion in a porous material through torque profiles during wet massing. 69th Canadian Chemical Engineering Conference. Halifax, NS.
  • S. Belbassai; I. E. Achouri; N. Abatzoglou (Oct 2019) Steam reforming of toluene using nickel catalysts made from mining residues: comparative and characterisation studies. 69th Canadian Chemical Engineering Conference. Halifax, NS.
  • I. E. Achouri; A. Ly; N. Abatzoglou (Oct 2018) Phenomenological study of the wet granulation process for pharmaceutical components. 68th Canadian Chemical Engineering Conference Toronto, ON.