William Wilson

Financement

• Subvention. (Obtenu). Candidat principal. De l’ingénierie de la microstructure au déploiement de bétons éco­efficaces. Conseil de Recherches en Sciences Naturelles et Génie du Canada (CRSNG). Supplément Tremplin vers la découverte. 12 000 $. (2022-2027)
• Subvention. (Obtenu). Candidat principal. Pôle technologique ME2ACM (Multiscale Engineering of Eco-friendly Alternative Cementitious Materials). Centre de recherche sur les infrastructures de béton (CRIB). 3e appel à projets conjoints. 60 000 $. (2022-2025)
• Subvention. (Obtenu). Cocandidat. Solutions intégrées de valorisation des granulats et fines recyclés dans le béton: vers une économie circulaire. Centre de recherche sur les infrastructures de béton (CRIB). 3e appel à projets conjoints. 60 000 $. (2022-2025)
• Subvention. (Obtenu). Candidat principal. Introduction de l’intelligence artificielle à l’usine pour une réduction des émissions carbone associées à la production du béton. Mitacs + Partenaire industriel. Accélération. 240 000 $. (2021-2025)
• Subvention. (Obtenu). Cocandidat. Granulomètre à diffraction laser pour mesurer la taille de micro et nanoparticules. Conseil de Recherches en Sciences Naturelles et Génie du Canada (CRSNG). Programme de subventions d'outils et d'instruments de recherche. 142 473 $. (2022-2023)

Publications

Articles de revue

• Poussardin V*, Wilson W, Paris M, Tagnit-Hamou A & Deneele D. (2023). Calcined clays as supplementary cementitious materials : a comparison between palygorskite and kaolinite. Cement and Concrete Research (Révision demandée).
• Poussardin V*, Roux V, Wilson W, Paris M, Tagnit-Hamou A & Deneele D. (2023). Calcined palygorskites as supplementary cementitious materials. Clays and Clay Minerals (Révision demandée).
• Georget F, Wilson W, Matschei T. (2023). Long-term extrapolation of chloride ingress: an illustration of the feasibility and pitfalls of the square root law. Cement and Concrete Research (Révision demandée).
• Wang Q*, Wilson W, Scrivener KL. (2023). Unidirectional penetration approach for characterizing sulfate attack mechanisms on cement mortars and pastes. Cement and Concrete Research (Révision demandée).
• Esselami R*, Wilson W, Tagnit-Hamou A. (2022). An accelerated physical sulfate attack test using an induction period and heat drying: First applications to concrete with different binders including ground glass pozzolan and limestone filler. Construction and Building Materials 345 128046. (Article publié).
• Poussardin V*, Paris M, Wilson W, Tagnit-Hamou A & Deneele D. (2022). Calcined palygorskite and smectite bearing marlstones as supplementary cementitious materials. Materials and Structures 55 (224), (Article publié).
• Georget F, Bénier C*, Wilson W, Scrivener KL. (2022). Chloride sorption by C-S-H quantified by SEM-EDX image analysis. Cement and Concrete Research 152 106656. (Article publié).
• Mejdi M, Wilson W, Saillio M, Chaussadent T, Divet L, Tagnit Hamou A. (2022). Hydration and microstructure of glass powder cement pastes – A multi-technique investigation. Cement and Concrete Research 151 106610. (Article publié).
• Wilson W, Gonthier JN*, Georget F, Scrivener KL. (2022). Insights on chemical and physical chloride binding in blended-cement pastes. Cement and Concrete Research 156 106747. (Article publié).
• Georget F, Wilson W, Scrivener KL. (2022). Simple automation of SEM-EDS spectral maps analysis with Python and the edxia framework. Journal of Microscopy 286 185–190. (Article publié).
• Georget F, Lothenbach B, Wilson W, Zunino F, Scrivener KL. (2022). Stability of hemicarbonate under cement paste-like conditions. Cement and Concrete Research 153 106692. (Article publié).
• Wilson W, Georget F, Scrivener KL. (2021). Unravelling chloride transport/microstructure relationships for blended- cement pastes with the mini-migration method. Cement and Concrete Research 140 106264. (Article publié).
• Georget F, Wilson W, Scrivener K. (2021). edxia, microstructure characterisation from quantified SEM-EDS hypermaps. Cement and Concrete Research 141 106327. (Article publié).
• Mejdi M, Wilson W, Saillio M, Chaussadent T, Divet L, Tagnit Hamou A. (2020). Quantifying glass powder reaction in blended-cement pastes with the Rietveld-PONKCS method. Cement and Concrete Research 130 105999. (Article publié).
• Mejdi M, Wilson W, Saillio M, Chaussadent T, Divet L, Tagnit-Hamou A. (2019). Investigating the pozzolanic reaction of post-consumption glass powder and the role of portlandite in the formation of sodium-rich C-S-H. Cement and Concrete Research 123 105790. (Article publié).
• Wilson W, Soliman N A, Sorelli L, Tagnit-Hamou A. (2019). Micro-chemo-mechanical features of ultra-high performance glass concrete (UHPGC). Theoretical and Applied Fracture Mechanic Journal 104 102373. (Article publié).
• Hisseine O A, Wilson W, Sorelli L, Tolnai B, Tagnit-Hamou A. (2019). Nanocellulose for Improved Concrete Performance: A Macro-to-Micro Investigation for Disclosing the Effects of Cellulose Filaments on Strength of Cement Systems. Construction and Building Materials 206 84–96. (Article publié).
• Sui S, Wilson W, Georget F, Maraghechi H, Kazemi-Kamyab H, Sun W, Scrivener KL. (2019). Quantification methods for chloride binding in Portland cement and limestone systems. Cement and Concrete Research 125 105864. (Article publié).
• Wilson W, Sorelli L, Tagnit-Hamou A. (2018). Automated coupling of NanoIndentation and Quantitative Energy-Dispersive Spectroscopy (NI-QEDS): A comprehensive method to disclose the micro-mechanical properties of cement pastes. Cement and Concrete Research 103 49–65. (Article publié).
• Wilson W, Sorelli L, Tagnit-Hamou A. (2018). Unveiling micro-chemo-mechanical properties of C–(A)–S–H and other phases in blended-cement pastes. Cement and Concrete Research 107 317-336. (Article publié).
• Aïtcin P-C & Wilson W. (2017). Határ Az Ég / The Sky’s the Limit – Evolution in Construction of High-Rise Buildings (Hungarian translation). Vasbetonépítés XVIII (4), 89–93. (Article publié).
• Wilson W, Rivera-Torres J M, Sorelli L, Durán Herrera A, Tagnit-Hamou A. (2017). The micromechanical signature of high-volume natural pozzolan concrete by combined statistical nanoindentation and SEM-EDS analyses. Cement and Concrete Research 91 1–12. (Article publié).
• Aitcin P-C, Wilson W, Mindess S. (2016). Increasing the Strength of Concrete Made with Blended Cements. Concrete International 38 (8), 49–52. (Article publié).
• Aitcin P-C, Wilson W, Mindess S. (2016). Increasing the Strength of Concrete Made with Blended Cements. Concrete International 38 (8), 49–52. (Article publié).
• Aïtcin P-C & Wilson W. (2015). Du béton jusqu’au ciel. Béton[s] 59 59–60. (Article publié).
• Aïtcin P-C & Wilson W. (2015). El cielo es el límite – Evolución en la construcción de edificios de gran altura. Concreto al Día (4), 6–11. (Article publié).
• Krakowiak K J, Wilson W, James S, Musso S, & Ulm F-J. (2015). Inference of the phase-to-mechanical property link via coupled X-ray spectrometry and indentation analysis: Application to cement-based materials. Cement and Concrete Research 67 271–285. (Article publié).
• Aïtcin P-C & Wilson W. (2015). The Sky’s the Limit – Evolution in Construction of High-Rise Buildings. Concrete International 37 (1), 45–50. (Article publié).
• Aïtcin P-C & Wilson W. (2015). The Sky’s the Limit – Evolution in Construction of High-rise Buildings (Polish translation). Cement Wapno Beton (4), 209–216. (Article publié).
• Aïtcin P-C & Wilson W. (2015). The sky’s the limit. Evolution in construction of high-rise buildings (Russian translation). UEMEHT (3), 74–78. (Article publié).
• Aïtcin P-C & Wilson W. (2014). Cement of today, concretes of tomorrow. Cement Wapno Beton (6), 349–358. (Article publié).
• Wilson W, Krakowiak K J, & Ulm F-J. (2014). Simultaneous assessment of phase chemistry, phase abundance and bulk chemistry with statistical electron probe micro-analyses: Application to cement clinkers. Cement and Concrete Research 55 35–48. (Article publié).
• Wilson W & Tagnit-Hamou A. (2014). Workability and Hydration of Superplasticized Cementitious Mixtures with Rice Husk Ash. ACI Materials Journal 111 (5), 491–500. (Article publié).

Chapitres de livre

• Aïtcin P-C & Wilson W. (2016). Le béton au Québec: 50 ans de progrès – Préoccupations actuelles. 50 ans de progrès dans le domaine du béton (264). ACI – Section du Québec et l’Est de l’Ontario. (Article publié).

Articles de magazine

• Van der Spek M. (2015). Reinventing concrete in West Africa: the RRiH-Silicator. Club Africa.

Articles de conférence

• Wilson W, Gonthier JN*, Georget F, Scrivener KL. (2022). Chemical and physical chloride binding in LC³ pastes with different water-to-binder ratios. 4th International Conference on Calcined Clays for Sustainable Concrete. (Article publié).
• Wilson W, Gonthier JN*, Georget F, Scrivener KL. (2022). Quantification of chemical and physical chloride binding in blended-cement pastes. Gordon Research Conference on Advanced Materials for Sustainable Infrastructure Development “Cement Based Materials: Reaching Net Zero”. (Article publié).
• Gonthier JN*, Wilson W, Georget F, Scrivener KL. (2021). Advanced characterization of chloride binding in OPC and LC3 pastes. 4th International RILEM Conference on Microstructure Related Durability of Cementitious Composites. 244–251. (Article publié).
• Georget F, Bénier C*, Wilson W, Scrivener KL. (2021). Direct observation of chloride sorption on C-S-H. ERICA-CASH II Final Conference. (Article publié).
• Wilson W, Georget F, Gonthier JN*, Scrivener KL. (2021). Investigating Chloride Diffusion Coefficients in LC3 Systems. Supplementary Papers, (Article publié).
• Wang Q*, Wilson W, Scrivener KL. (2021). Investigating Dual Sulfate Attack Mechanisms using Unidirectional Penetration Approach. ACI/RILEM SP-349, 623-628. (Article publié).
• Georget F, Wilson W, Soja W, Zheng J, Scrivener KL. (2021). The role of the micron-scale in reactive transport processes. 4th International RILEM Conference on Microstructure Related Durability of Cementitious Composites. 705–712. (Article publié).
• Wang Q*, Wilson W, Scrivener K. (2021). Unidirectional sulfate ingress in limestone calcined clay cement (LC3) pastes under cyclic exposure. 4th International RILEM Conference on Microstructure Related Durability of Cementitious Composites. 87–95. (Article publié).
• Scrivener K, Georget F, Wilson W, Sui S. (2020). Developing a generic approach to durability. 4th International RILEM Conference on Microstructure Related Durability of Cementitious Composites. 424–430. (Article publié).
• Georget F, Wilson W, Scrivener KL. (2020). Microstructure characterization from EDS hypermaps. CIME Day at the Interdisciplinary Center for Electron Microscopy (CIME). (Article publié).
• Wilson W, Gonthier JN*, Georget F, Scrivener KL. (2020). Tortuosity as a Key Parameter of Chloride Diffusion in LC3 Systems. S. Bishnoi (ed.), Calcined Clays for Sustainable Concrete, RILEM Bookseries 25, 593-600. (Article publié).
• Wilson W, Georget F, Scrivener KL. (2020). Understanding the chloride resistance of binders with the mini-migration approach. Gordon Research Seminar & Gordon Research Conference on Advanced Materials for Sustainable Infrastructure Development. (Article publié).
• Wilson W, Soliman NA, Sorelli L, Tagnit-Hamou A. (2019). Microstructure features of an innovative ultra-high-performance glass concrete (UHPGC). Papers and Posters Proceedings of the 15th International Congress on the Chemistry of Cement, ID247:1-7. (Article publié).
• Hisseine OA, Wilson W, Sorelli L, Tagnit-Hamou A. (2019). Understanding the role of nanocellulose on the strength of cement composites: a macro-to-micro investigation of systems with cellulose filaments. Proceedings, (Article publié).
• Wilson W, Labattaglia V*, Tagnit-Hamou A, Sorelli L. (2019). Will Blended-Cement Systems with Similar Chloride Penetration Potentials Resist Similarly to Corrosion?. Proceedings of the Sixth International Conference on the Durability of Concrete Structures, 587-591. (Article publié).
• Wilson W, Tagnit-Hamou A, Sorelli L. (2018). Experimental investigation of C–A–S–H micro-chemo-mechanical properties in blended-cement pastes. 38th Cement and Concrete Science Conference. (Article publié).
• Wilson W, Sorelli L, Tagnit-Hamou A. (2017). Chemo-mechanical properties of cement matrices with fly ash and slag. ACI/RILEM SP-320, 29.1–13. (Article publié).
• Rivera-Torres J M, Wilson W, Tagnit-Hamou A, Sorelli L, Duran-Herrera A. (2017). Effect of a pumice as pozzolanic material in high performance concrete. Supplementary Papers, 52.1–21. (Article publié).
• Wilson W, Sorelli L, Krishnan S, Bishnoi S, Tagnit-Hamou A. (2017). Micro-chemo-mechanical Characterization of a Limestone-Calcinated-Clay Cement Paste by Statistical Nanoindentation and Quantitative SEM-EDS. Calcined Clays for Sustainable Concrete, 494–499. (Article publié).
• Wilson W, Katabarwa J-B, Tagnit-Hamou A, Aïtcin P-C. (2016). Improving the quality of fired clay bricks using rice husks: A Rwandese pilot project. Proceedings, 47-57. (Article publié).
• Wilson W, Tagnit-Hamou A, & Sorelli L. (2015). Analyses mécano-chimiques de la microstructure de mélanges cimentaires avec poudre de verre. Annual meeting of the "Chaire SAQ de valorisation du verre dans les matériaux". (Article publié).
• Aïtcin P-C & Wilson W. (2015). The Importance of the Water-to-Cement and the Water-to-Binder Ratios. Supplementary Papers, 695–704. (Article publié).
• Wilson W. (2014). Du riz au béton. Dévoilement de la programmation estivale à la Maison du développement durable. (Article publié).
• Wilson W, Krakowiak K J, Bauchy M, Ulm F-J, & Pellenq R J M. (2013). Clinker Grindability: Phase Properties and Microstructure. Concrete Sustainability Hub – MIT CSHub Showcase. (Article publié).
• Krakowiak K J, Wilson W, & Ulm F-J. (2013). In-situ Chemo-Mechanical Characterization of Cementitious Microstructures. Concrete Sustainability Hub – MIT CSHub Showcase. (Article publié).
• Krakowiak K, Wilson W, James S, & Ulm F. (2013). In-situ Chemo-Mechanical Characterization of Cementitious Microstructures with Coupled X-Ray Microanalysis and Indentation Technique. Proceedings, 190–200. (Article publié).
• Wilson W & Tagnit-Hamou A. (2013). Rice Husk Ash Concrete: Application to Rural African Housing. Proceedings, Allemagne, 663–671. (Article publié).
• Feltrin, G., Steiger, R., Gsell, D., Gülzow, A., & Wilson, W.*. (2010). Serviceability assessment of a wooden trough bridge by static and dynamic tests. Proceedings, Paper 10. (Article publié).
• Wilson W* & Bere S F*. (2009). Des écorces de riz pour sauver les forêts du Burkina Faso: Projet de développement d’un four à écorces de riz, mis en oeuvredans la plaine rizicole de Bama. Journée de la recherche 2009 – "Les grands esprits se rencontrent". (Article publié).
• Gülzow A, Steiger R, Gsell D, Wilson W*, & Feltrin G. (2007). Dynamic Field Performance of a Wooden Trough Bridge. Proceedings, (Article publié).

Autres contributions

Cours enseignés

• Projet de conception en génie civil. GCI 900. (2021-09-01).Université de Sherbrooke. Canada. (6CR).
• Technologie des matériaux. GC1 120. (2021-01-11).Université de Sherbrooke. Canada. (3CR).
• Communication et pratique professionnelle. GCI 606. (2014-01-05 à 2016-04-29).Université de Sherbrooke. Canada. (2CR).
• Initiation à la pratique professionnelle. GCI 605. (2013-09-03 à 2015-12-18).Université de Sherbrooke. Canada. (3CR).
• Méthodes expérimentales. GCI 108. (2010-09-07 à 2010-12-17).Université de Sherbrooke. Canada. (3CR).

Gestion d'évènements

• Membre du comité scientifique et responsable de la plateforme MSC-SMC 2020. (2020) Symposium virtuel 2020 de la Société de Microscopie du Canada. (Conférence).
• Présidence (chair). (2020) Gordon Research Seminar 2020 on Advanced Materials for Sustainable Infrastructure Development: Concrete Solutions Towards Carbon Neutral Construction by 2050. (Conférence).

Activités de collaboration internationale

• Chair du comité RILEM TC 298-EBD. Le comité RILEM TC 298-EBD vise à développer l'utilisation de méthodes d'essai sur pâtes de ciment pour évaluer les effets des nouveaux ajouts cimentaires sur la résistance des bétons à la pénétration et à l'endommagement par des ions délétères (chlorures et sulfates).
• Membre du comité RILEM TC 282-CCL. Le comité technique RILEM TC 282-CCL a pour objectif de promouvoir l'utilisation des argiles calcinées comme matériaux cimentaires supplémentaires et leur incorporation dans les pratiques actuelles de fabrication et d'utilisation du ciment.