Aller au contenu

Saïd Elkoun

Professeur, Faculté de génie
FAC. GÉNIE Mécanique

Présentation

Sujet de recherche

Polymères, Plasturgie, Préparation et transformation, Biomatériaux, Composites

Disciplines de recherche

Génie des matériaux et génie métallurgique, Génie mécanique

Mots-clés

biopolymères, composites, cristallisation, Mise en oeuvre, microstructure, propriétés

Intérêts de recherche

Cristallisation, mise en œuvre, biomatériaux

Langues parlées et écrites

Anglais, Français

Diplômes

(1999). (Postdoctorat, Postdoc). Virginia Polytechnic Institute and State University.

(1998). (Doctorat, Doctorat). Université de Lille I (Sci. & Tech.).

(1995). (Diplôme, DEA). Université de Lille I (Sci. & Tech.).

(1992). (Baccalauréat, Bac (France)). Université de Lille I (Sci. & Tech.).

Expérience académique

Professeur titulaire. (2015-). Université de Sherbrooke. Canada.

Directeur département de génie mécanique. (2013-2017). Université de Sherbrooke. Canada.

Financement

  • Subvention. (En cours d’évaluation). Chercheur principal. biopolymer composites reinforced with nanoparticles and natural fibers derived from renewable resources or agricultural wastes: Understanding Processing-Microstructure-Properties relationships. Conseil de Recherches en Sciences Naturelles et Génie du Canada (CRSNG). DG. 200 000 $. (2022-2027)
  • Subvention. (En cours d’évaluation). Candidat principal. Alginate-based biofilms : from extraction to application. MITACS. Acceleration. 250 000 $. (2022-2025)
  • Subvention. (En cours d’évaluation). Candidat principal. Décontamination, formulation et caractérisation de mélanges polymères à base de polyéthylènes recyclés post-consommation pour diverses applications. MITACS. Accélération. 260 000 $. (2022-2025)
  • Subvention. (Obtenu). Cocandidat. Highly Conductive Polymer Nanocomposites for Proton Exchange Membrane Fuel Cell (PEMFC) Bipolar Plates: Evaluation of a high-purity graphite extracted from a Canadian graphite mine. Conseil de Recherches en Sciences Naturelles et Génie du Canada (CRSNG). alliance. 371 000 $. (2022-2025)
  • Subvention. (Obtenu). Cocandidat. Durability and stability of spacer dampers made of synthetic rubbers under environmental aging conditions. Conseil de Recherches en Sciences Naturelles et Génie du Canada (CRSNG). Alliance. 750 000 $. (2021-2024)
  • Subvention. (Obtenu). Cocandidat. Durabilité et stabilité des entretoises d’amortisseur des lignes électriques en élastomère dans des conditions de vieillissement accélérées. Centre de recherche en plasturgie et composites (CREPEC). projet Intégrateur. 20 000 $. (2021-2023)
  • Subvention. (Refusé). Cocandidat. Développement Économique Canada (DEC)-Fonds de diversification économique. Développement Économique Canada (DEC)-Montréal. Fonds de diversification économique (Asbestos). 4 500 000 $. (2020-2022)
  • Subvention. (Obtenu). Candidat principal. Carrefour d'innovations en technologies écologiques (CITÉ). Développement Économique Canada (DEC)-Estrie. Infrastructure de Recherche et développement. 1 000 000 $. (2020-2022)
  • Subvention. (Obtenu). Candidat principal. Extraction et traitement de surface par voie enzymatique des fibres de la biomasse agroalimentaire prétaitée aux fluides verts et éco-compatibles. (2017-2021)
  • Subvention. (Obtenu). Candidat principal. Élaboration et caractérisation de bio-composites PLA/fibres naturelles modifiées en surface par traitement combiné plasma et immersion dans une solution de lignine ou tanin. CQMF. projets de collaboration interinstitutionnel. 20 000 $. (2019-2021)
  • Subvention. (Obtenu). Cocandidat. Préparation de nanocristaux d'amidon par voie enzymatique et l'action du CO2 liquide à partir de pommes de terre déclassées pour leur utilisation dans la synthèse de matériaux composites verts. (2016-2019)
  • Subvention. (Obtenu). Collaborateur. Bétonanture: utilisation des fibres naturelles renovuelables dans les bétons à hautes performances. (2015-2018)
  • Bourse d’études. (Obtenu). Cochercheur. Caractérisation des propriétés thermophysiques de nanofluides et de leurs performances dans les échangeurs. (2015-2018)
  • Subvention. (Obtenu). Cocandidat. Élaboration de fibres naturelles fonctionnelles pour les composites polymères. (2015-2018)
  • Subvention. (Obtenu). Collaborateur. Flax fiber-reinforced materials for building and structural applications. (2015-2018)
  • Subvention. (Obtenu). Collaborateur. Élaboration de nouveaux films minces biosourcés renforcés par des nanocristaux polysaccharides. (2016-2018)
  • Bourse d’études. (Obtenu). Candidat principal. Développement et amélioration de technologies dédiées à la caractérisation des matériaux utilisés pour le contrôle du bruit. (2015-2017)
  • Subvention. (Obtenu). Cochercheur. Structure and Mechanical Properties of Poly(lactic acid) Reinforced with Polymer-Grafted Natural Nanocrystals : A Case of Starch Nanocrystals-graft-?-Pinene Oxide via Ring-Opening Polymerization. (2015-2017)
  • Subvention. (Obtenu). Chercheur principal. Programme de projet collaboration-CREPEC. (2014-2017)
  • Subvention. (Obtenu). Cochercheur. Structure and Mechanical properties of Poly(Lactic acid) reinforced with polymer Grafted Corn Starch nanocrystals. (2015-2017)
  • Subvention. (Terminé). Chercheur principal. Cristallisation, microstructure et propriétés de nanocomposites à matrices biopolymères renforcées par des nanocristaux d'amidon. (2011-2016)
  • Subvention. (Obtenu). Chercheur principal. Caractérisation Microstructurale et Thermomécanique de Films Biopolymères Renforcés par des Nanocristaux d'Amidon. (2011-2016)
  • Subvention. (Obtenu). Chercheur principal. Caractérisation du comportement en fluage du polypropylène. (2015-2015)
  • Subvention. (Obtenu). Chercheur principal. Caractérisation Fine Thermique et Hydrodynamique de Nanofluides Caloporteurs. (2015)
  • Subvention. (Refusé). Chercheur principal. Éco-conception à partir de végétaux et de polymères recyclés de nouveaux matériaux aux propriétés acoustiques avancées'. Fonds Québécois de la Recherche sur la Nature et les Technologies (FQRNT). projet de recherche en équipe. 278 800 $. (2012-2015)
  • Subvention. (Obtenu). Cochercheur. Nucléation et cristallisation du polylactide. (2011-2014)
  • Subvention. (Obtenu). Cochercheur. Étude exploratoire des mécanismes de dissipation et d'isolation acoustiques de panneaux d'insonorisation faits de fibres naturelles produites au Canada. (2012-2012)
  • Contrat. (Terminé). Chercheur principal. Étude de la biétirabilité de polyamides. (2006-2007)
  • Contrat. (Terminé). Chercheur principal. Mise au point d'une méthode expérimentale permettant de suivre l'évolution de la fissuration sous contrainte sous environnement corrosif du polycarbonate (application au milieu médical). Air Liquide (Paris, France). Contrat de recherche industriel (Société Anios filiale A.L.). 30 000 $. (2005-2006)
  • (Terminé). Chercheur principal. Infrastructure de recherche pour la caractérisation dynamique et rhéologique des polymères et composites. (2005-2006)
  • Bourse de recherche. (1995-1998)

Publications

Articles de revue

  • Nlandu, H., Belkacemi, K., Chorfa, N., Elkoun, S., Robert, M., Hamoudi, S. (2020). Flax nanofibrils production via supercritical carbon dioxide pre-treatment and enzymatic hydrolysis. Canadian Journal of Chemical Engineering 98 (1), 84-95. (Article publié).
  • Nlandu H., Belkacemi K., Chorfa N., Elkoun S., Robert M., Hamoudi S. (2020). Laccase-Mediated Grafting of Phenolic Compounds onto Lignocellulosic Flax Nanofibers. Journal of Natural Fibers (Article sous presse).
  • Ovlaque, P., Bayart, M., Cousin, P., Durand, J., Mercusot, G., Elkoun, S., Robert, M. (2020). Mechanical & Interfacial Properties of Bamboo Lamella-PP Composites – Effect of Lamella Treatment. Fibers and Polymers, 21 (5), pp. 1086-1095. 21 (5), 1086-1095. (Article publié).
  • Ovlaque, P., Foruzanmehr, M., Elkoun, S., Robert, M. (2020). Milkweed floss fiber/PLA composites: effect of alkaline and epoxy-silanol surface modifications on their mechanical properties. Composite Interfaces 27 (5), 495-513. (Article publié).
  • Soulié, S., Bilem, I., Chevallier, P., Elkoun, S., Robert, M., Naudé, N., Laroche, G. (2020). Milkweed scaffold: a new candidate for bone cell growth. International Journal of Polymeric Materials and Polymeric Biomaterials, . 69 (13), 872-883. DOI. (Article publié).
  • ovlaque, P., Foruzanmehr, M., Elkoun, S., Robert, M. (2020). On the effectiveness of the addition of milkweed floss fibers on processing and mechanical properties of PLA biocomposites. Polymer Engineering and Science 60 (6), 1377-1388. (Article publié).
  • Bayart M., Adjallé K., Diop A., Ovlaque P., Barnabé S., Robert M., Elkoun S. (2020). PLA/flax fiber bio-composites: effect of polyphenol-based surface treatment on interfacial adhesion and durability. Composite Interfaces 1-22. (Article sous presse).
  • Richard, C., Cousin, P., Foruzanmehr, M., Elkoun, S., Robert, M. (2019). Characterization of components of milkweed floss fiber. Separation Science and Technology 54 (48), 3091-3099. (Article publié).
  • Zamir, S.S., Frouzanmehr, M.R., Nagalakshmaiah, M., Ajji, A., Robert, M., Elkoun, S. (2019). Chemical compatibility of lactic acid-grafted starch nanocrystals (SNCs) with polylactic acid (PLA). Polymer Bulletin 76 (7), 3481-3499. (Article publié).
  • Campeau, S., Panneton, R., Elkoun, S. (2019). Experimental validation of an acoustical micro-macro model for random hollow fibre structures. Acta Acustica united with Acustica 105 (1), 240-247. (Article publié).
  • Fathi, B., Foruzanmehr, M., Elkoun, S., Robert, M. (2019). Novel approach for silane treatment of flax fiber to improve the interfacial adhesion in flax/bio epoxy composites. Journal of Composite Materials 53 (16), 2229-2238. (Article publié).
  • Bouguerra, N., Poncet, S., Elkoun, S. (2018). Dispersion regimes in alumina/water-based nanofluids: Simultaneous measurements of thermal conductivity and dynamic viscosity. International Communications in Heat and Mass Transfer 92 51-55. (Article publié).
  • Jalali, A., Huneault, M.A., Elkoun, S. (2018). Effect of molecular weight on the nucleation efficiency of poly(lactic acid) crystalline phases. Journal of Polymer Research 24 (11), 182. (Article publié).
  • Rajinipriya, M., Nagalakshmaiah, M., Robert, M., Elkoun, S. (2018). Homogenous and transparent nanocellulosic films from carrot. Industrial Crops and Products 118 53-64. (Article publié).
  • Shamloo, A., Fathi, B., Elkoun, S., Rodrigue, D., Soldera, A. (2018). Impact of compression molding conditions on the thermal and mechanical properties of polyethylene. journal of Applied Polymer Science 135 (15), 46176. (Article publié).
  • Rajinipriya, M., Nagalakshmaiah, M., Robert, M., Elkoun, S. (2018). Importance of Agricultural and Industrial Waste in the Field of Nanocellulose and Recent Industrial Developments of Wood Based Nanocellulose: A Review. ACS Sustainable Chemistry and Engineering 6 (3), 2807-2828. (Article publié).
  • Rajinipriya, M., Nagalakshmaiah, M., Astruc, J., Robert, M., Elkoun, S. (2018). Single stage purification of flax, hemp, and milkweed stem and their physical and morphological properties. International Journal of Polymer Analysis and Characterization 23 (1), 78-88. (Article publié).
  • Athmouni, N., Mighri, F., Elkoun, S. (2018). Surface modification of multiwall carbon nanotubes and its effect on mechanical and through-plane electrical resistivity of PEMFC bipolar plate nanocomposites. Polymers for Advanced Technologies 29 (1), 294-301. (Article publié).
  • Fathi, B., Harirforoush, M.J., Foruzanmehr, M.R., Elkoun, S., Robert, M. (2017). Effect of TEMPO oxidation of flax fibers on the grafting efficiency of silane coupling agents. Journal of Materials Science 52 (17), 10624-10636. (Article publié).
  • Jalali A., Huneault M.A., Elkoun S. (2017). Effect of molecular weight on the nucleation efficiency of poly(lactic acid) crystalline phases. Journal of Polymer Research 24 (11), 182. (Article soumis).
  • Jalali, A., Shahbikian, S., Huneault, M.A., Elkoun, S. (2017). Effect of molecular weight on the shear-induced crystallization of poly(lactic acid). Polymer 112 393-401. (Article publié).
  • Jalali A., Shahbikian S., Huneault M.A., Elkoun S. (2017). Effect of molecular weight on the shear-induced crystallization of poly(lactic acid). Polymer 112 393-401. (Article publié).
  • Astruc, J., Nagalakshmaiah, M., Laroche, G., Grandbois, M., Elkoun, S., Robert, M. (2017). Isolation of cellulose-II nanospheres from flax stems and their physical and morphological properties. Carbohydrate Polymers 178 352-359. (Article publié).
  • Bayart M., Gauvin F., Foruzanmehr M.R., Elkoun S., Robert M. (2017). Mechanical and moisture absorption characterization of PLA composites reinforced with nano-coated flax fibers. Fibers and Polymers 18 (7), 1288-1295. (Article publié).
  • Foruzanmehr M.R., Boulos L., Vuillaume P.Y., Elkoun S., Robert M. (2017). The Effect of cellulose oxidation on interfacial bonding of nano-TiO2 coating to flax fibers. Cellulose 24 (3), 1529-1542. (Article accepté).
  • Lafforgue, O., Bouguerra, N., Poncet, S., Seyssiecq, I., Favier, J., Elkoun, S. (2017). Thermo-physical properties of synthetic mucus for the study of airway clearance. Journal of Biomedical Materials Research - Part A 105 (11), 3025-3033. (Article publié).
  • Boulos, L., Foruzanmehr, M.R., Tagnit-Hamou, A., Elkoun, S., Robert, M. (2017). Wetting analysis and surface characterization of flax fibers modified with zirconia by sol-gel method. Surface and Coatings Technology 313 407-416. (Article publié).
  • Foruzanmehr M., Elkoun S., Fam A., Robert M. (2016). Degradation characteristics of new bio-resin based-fiber-reinforced polymers for external rehabilitation of structures. Journal of Composite Materials 50 (9), 1227-1239. (Article publié).
  • Jalali A., Huneault M.A., Elkoun S. (2016). Effect of thermal history on nucleation and crystallization of poly(lactic acid). Journal of Materials Science 51 (16), 7768-779. (Article accepté).
  • Athmouni N., Mighri F., Elkoun S. (2016). Effect of unfunctionalized and HNO3-functionalized MWCNT on the mechanical and electrical performances of PEMFC bipolar plates. Journal of Applied Polymer Science 133 43624. (Article publié).
  • Foruzanmehr M., Vuillaume P.Y., Elkoun S., Robert M. (2016). Physical and mechanical properties of PLA composites reinforced by TiO2 grafted flax fibers. Materials and Design 106 295-304. (Article publié).
  • Verdière K., Panneton R., Elkoun S. (2016). Prediction of the acoustic behavior of a parallel assembly of hollow cylinders. Applied Acoustics 102 (Article publié).
  • Tehfe, M.-A., Elkoun, S., Robert, M. (2016). Synthesis and Characterization of Gold/Polymer Nanocomposites by Thermal Cationic and Radical Polymerization Processes: Initiating Systems Based on Amine and/or Silane Reducing Agents. Macromolecules (Article soumis).
  • Tehfe M.-A., Jamois R., Cousin P., Elkoun S., Robert M. (2015). In Situ Synthesis and Characterization of Silver/Polymer Nanocomposites by Thermal Cationic Polymerization Processes at Room Temperature: Initiating Systems Based on Organosilanes and Starch Nanocrystals. Langmuir 31 (14), 4305-4313. (Article publié).
  • Tehfe, M.-A., Elkoun, S., Robert, M. (2015). N-vinylcarbazole: as an additive for Thermal Polymerization at Room Temperature with in situ Formation of Ag(0) Nanoparticules. Applied Sciences 5 (3), 241-258. (Article publié).
  • Foruzanmehr M., Vuillaume P.Y., Robert M., Elkoun S. (2015). The effect of grafting a nano-TiO2 thin film on physical and mechanical properties of cellulosic natural fibersOriginal. Materials & Design 85 (15), 671-678. (Article publié).
  • Verdière K., Panneton R., Elkoun S., Dupont T., Leclaire P. (2014). Comparison between parallel transfer matrix method and admittance sum method. Journal of the Acoustical Society of America 136 (2), EL90-EL95. (Article publié).
  • Methenni A., Mighri F., Elkoun S., Fang H., Cassagnau P. (2013). Fluorescence quenching of fluoranthene by maleic anhydride in solution and during nonreactive and reactive twin-screw extrusion. Polymer Engineering and Science 53 (2), 295-300. (Article publié).
  • Verdière K., Panneton R., Elkoun S., Dupont T., Leclaire P. (2013). Transfer matrix method applied to the parallel assembly of sound absorbing materials. Journal of the Acoustical Society of America 134 (6), 4648-4658. (Article soumis).
  • Fang H., Mighri F., Ajji A., Cassagnau P., Elkoun S. (2011). Flow behavior in a corotating twin-screw extruder of pure polymers and blends:Characterization by fluorescence monitoring technique. Journal of Applied Polymer Science 120 (4), 2304-2312. (Article publié).
  • Nguyen, L., Mighri, F., Deyrail, Y., Elkoun, S. (2010). Conductive materials for proton exchange membrane fuel cell bipolar plates made from PVDF,PET and co-continuous PVDF/PET filled with carbon additives. Fuel Cells 10 (6), 938-948. (Article publié).
  • Stoclet G., Lefebvre J.-M., Séguéla R., Elkoun S.Vanmansart C. (2010). Strain-induced molecular ordering of Poly(lactic acid) upon uniaxial stretching. Macromolecules 43 (3), 1488-1498. (Article publié).
  • N. Sallem-Idrissi, V. Miri, S. Elkoun, P. Krawczak, M.-F. Lacrampe, J.-M. Lefebvre, R. Seguela. (2009). Trichroic infrared analysis of the strain-induced structural changes in the PA6 layer of PA6/PE multilayer films under biaxial drawing. Polymer 50 (24), 5812-5823. (Article publié).
  • Miri V., Elkoun S., Peurton F., Vanmansart C., Lefebvre J.-M., Krawczak P., Seguela R. (2008). Crystallization kinetics and crystal structure of nylon 6-clay nanocomposites: combined effects of thermo-mechanical history, clay content and cooling conditions. Macromolecules 41 (23), 9234-9244. (Article publié).
  • Elkoun S., Huneault M.A., Zhang X.M., McCormick, K., Puterbaugh, Kale L. (2005). LLDPE-based mono- and multilayer blown films: LLDPE blown films property enhancement through coextrusion. Polymer Engineering and Science 45 (9), 1222-1230. (Article publié).
  • Elkoun S., Huneault M.A., McCormick K., Puterbaugh F., Kale L. (2005). LLDPE-based mono- and multilayer blown films: Property enhancement through coextrusion. Polymer Engineering and Science 45 (9), 1222-1230. (Article publié).

Chapitres de livre

  • Rajinipriya M., Gauvin F., Robert M., Elkoun S., Nagalakshmaiah M. (2019). Structural properties of protein and their role in polymer nanocomposites. Muhammed Lamin SanyangMohammad Jawaid. Bio-based Polymers and Nanocomposites: Preparation, Processing, Properties & Performance (217-232). Springer. (Article publié).
  • Nagalakshmaiah M., Afrin S., Malladi R.P., Elkoun S., Robert M., Ansari M.A., Svedberg A., Karim Z. (2018). Biocomposites: Present trends and challenges for the future. Green Composites for Automotive Applications (197-215). Elsevier. (Article publié).
  • Tehfe, M.-A., Elkoun, S., Robert, M. (2016). Synthesis and Characterization of Gold/Polymer Nanocomposites by Thermal Cationic and Radical Polymerization Processes: Initiating Systems Based on Amine and/or Silane Reducing Agents. Enrique Torres-Hergueta. Polymer science: research advances,practical applications and educational aspects. Polymer Science Book (1, 156-172). Polymer Science Book. (Article sous presse).

Articles de conférence

  • Ovlaque P., Bayart M., Elkoun S., Robert M. (2019). Short milkweed floss fiber as efficient natural reinforcement for polymeric materials. 6th Annual Composites and Advanced Materials Expo, CAMX 2019. TP19-0729. (Article publié).
  • Campeau S., Panneton R., Elkoun S. (2019). Sustainable acoustical fibrous material optimization using micro-macro model for random hollow fiber structures. Proceedings of the 26th International Congress on Sound and Vibration, ICSV 2019, (Article publié).
  • Ovlaque P., Foruzanmehr M., Robert M., Elkoun S. (2017). Feasibility study of injection molding of polylactic acid reinforced with milkweed floss hollow fibers. SAMPE. 1524-1535. (Article publié).
  • Verdiere K., Panneton R., Atalla N., Elkoun S. (2017). Inverse Poroelastic Characterization of Open-Cell Porous Materials Using an Impedance Tube. SAE Technical Papers, (Article publié).
  • Bayart M., Gauvin F., Foruzanmehr M., Robert M., Elkoun S. (2017). Mechanical and moisture absorption characterization of PLA composites reinforced with nano-coated flax fibers. SAMPE. 1436-1448. (Article publié).
  • Foruzanmehr M., Morisse S., Vuillaume P., Elkoun S., Robert M. (2016). Interfacial characterization of a functionalized cellulosic fiber reinforced PLA composites. International SAMPE Technical Conference, (Article publié).
  • Foruzanmehr, M., Elkoun, S., Robert, M. (2015). Characterization and durability study of TiO2 grafted flax fiber reinforced composites for external rehabilitation of structures. 65th Canadian Chemical Engineering conference (CSChE2015). (Article accepté).
  • Mighri F., Athmouni N., Elkoun S. (2015). Development of electrically conductive PVDF/PET systems. Annual Technical Conference - ANTEC, Conference Proceedings, 19-25. (Article publié).
  • Hassine Skima, Amirjalal Jalali, Saïd Elkoun, Mathieu Robert. (2015). Effect of chainentanglement on the crystallization of Poly (Lactic acid). International Conference and Exhibition on Biopolymers and Bioplastics. (Article publié).
  • Foruzanmehr, M., Elkoun, S., Robert, M. (2015). Interfacial characterization of epoxy-Resin reinforced with TiO2 coated flax fibers composites. SAMPE 2015. (Article publié).
  • Tehfe, M.-A, Elkoun, S., Robert, M. (2015). New Synthesis and Characterization of silver and/or gold nanoparticles by thermal cationic annd/or radical polymerization at room temperature and under air. Nanotech 2015. (Article publié).
  • Foruzanmehr M., Elkoun S., Robert M., Vuillaume P.Y. (2015). Physical and mechanical behavior of TiO2 thin film grafted flax reinforcements. CAMX 2015 - Composites and Advanced Materials Expo. 1850-1858. (Article publié).
  • Amirjalal Jalali, Shant Shahbikian, Saïd Elkoun, Michel Huneault, Mathieu Robert. (2015). Shear-induced crystallization of Poly (L-Lactic acid). 87th Annual Meeting of The Society of Rheology. (Article publié).
  • tehfe, M.-A., Elkoun, S. Robert, M. (2015). Starch nanocrystals as initiator and additive for thermal cationic polymerization at room temperature with in-situ formation of silver nanoparticles. 9th International Conference on Material Sciences (CSM9). (Article accepté).
  • S. Elkoun. (2015). Utilisation des caoutchoucs recyclés comme renforts dans les polymères. Carrefour d'innovation en technologies écologiques, Matières premières recyclage& innovation, Comité sectoriel de main-d’oeuvre de l’industrie du caoutchouc du Québec (CSMO). (Article accepté).
  • Balanger, B. Foruzanmehr, M., Elkoun, S., Robert, M. (2014). Characterization of Epoxy-resin reinforced with TiO2 modified flax fibers composites. The composites and advanced materials expo (CAMX). (Article publié).
  • Amirjalal Jalali, Michel Huneault, Saïd Elkoun. (2014). Effect of thermal history on nucleation and kinetics of crystallization of Poly(lactic acid). Polymer Processing Society Conference. (Article publié).
  • Foruzanmehr, M., Elkoun, S., Robert, M. (2014). Grafting of a nano-TIO2 thin film on cellulosic natural fiber as an interphase for reinforcing bio-polymer composites. International SAMPE Technical Conference, (Article publié).
  • K. Verdière, R. Panneton, S. Elkoun, T. Dupont and P. Leclaire. (2014). Homogeneity assumption and interaction between porous patches in the parallel transfer matrix method. Symposium On The Acoustics Of Poro-Elastic Materials SAPEM. (Article publié).
  • Foruzanmehr, M., Elkoun, S., Robert, M. (2014). Interfacial properties of grafted flax fibers/epoxy resin composites. 1st conference on Mechanic of Composites Materials (MECHCOMP). (Article publié).
  • Amirjalal Jalali, Michel Huneault, Saïd Elkoun. (2014). Self-seeding of Poly (lactic acid). International Conference on Bio-Based Materials and Composites. (Article publié).
  • K. Verdière, R. Panneton, S. Elkoun, T. Dupont and P. Leclaire. (2013). A method for measuring the acoustic properties of a porous sample mounted in a rigidring in acoustic tubes. 21st International Congress on Acoustics. (Article publié).
  • M. A. Huneault, A. Jalali and S. Elkoun, S. Saeidlou. (2013). NUCLEATION AND CRYSTALLIZATION OF PLA. Polymer Processing Society Conference. (Article publié).
  • K. Verdière, R. Panneton, S. Elkoun, T. Dupont and P. Leclaire. (2013). Predictionof acoustic properties of parallel assemblies by means of transfer matrixmethod. 21st International Congress on Acoustics. (Article publié).
  • Biboud, J., Panneton, R., Elkoun, S., Oddo, R. (2011). Assessment of acoustic properties of different recycled polymer-based materials for roadwork sound barrier walls application. Canadian Acoustics - Acoustique Canadienne, 22-23. (Article publié).
  • K. Verdière, R. Panneton, S. Elkoun, J. M. Lavoie and R. Oddo. (2011). Switchgrass-based noise absorbing material : characterization and modeling. Semaine canadienne d’acoustique. (Article publié).
  • Mighri, F., Nguyen, L., Elkoun, S. (2010). Developmentand characterization of conductive materials for PEMFC bipolar plates. ASME 2010 8th International Conference on Fuel Cell Science, Engineering and Technology, 327-334. (Article publié).

Autres contributions

Gestion d'évènements

  • organisateur et conférencier. (2015) Les composites passent au vert ! Séminaire de recherche dans le cadre du Carrefour d'innovations en technologies Écologiques (CITÉ) de Granby. (Séminaire).
  • Responsable, créateur et formateur. (2014) Formation continue en polymères et composites. (Cours).
  • Responsable, créateur et formateur. (2014) Formation continue en composites (Université de Sherbrooke campus de Longueuil). (Cours).