Aller au contenu

Jean-Marc Drouet

Professeur, Faculté de génie

FAC. GÉNIE Mécanique

Présentation

Sujet de recherche

Vibrations, Mécanique des solides, Sensation et perception

Disciplines de recherche

Génie mécanique

Mots-clés

confort vibratoire des vélos, capteurs à jauges d'extensométrie, optimisation des structures, pédagogie universitaire, enseignement et apprentissage des sciences&technos

Intérêts de recherche

confort vibratoire des vélos, capteurs à jauges d'extensométrie, mesure embarquée pour vélos, psychophysique, optimisation des structures, enseignement et apprentissage des sciences et technologies, pédagogie universitaire

Langues parlées et écrites

Anglais, Français

Diplômes

(2003). (Doctorat, Doctorat en génie mécanique). Université de Sherbrooke.

(1994). (Maîtrise avec mémoire, Maîtrise en génie mécanique). Université de Sherbrooke.

(1991). (Baccalauréat, Baccalauréat en génie mécanique). Université de Sherbrooke.

Expérience académique

Full professor. (2017-). Université de Sherbrooke. Canada.

Associate professor. (2008-2017). Université de Sherbrooke. Canada.

Assistant professor. (2003-2008). Université de Sherbrooke. Canada.

Lecturer. (1995-2003). Université de Sherbrooke. Canada.

Prix et distinctions

  • «Best Paper Award». International Sports Engineering Association (ISEA). (Prix).

Financement

  • Subvention. (Obtenu). Cochercheur. Centre de recherche sur l’enseignement et l’apprentissage des sciences (CREAS). Université de Sherbrooke. Programme interne de financement des infrastructures de recherche (PIFIR). 157 000 $. (2015-2021)
  • Subvention. (Obtenu). Collaborateur. Les sciences à l'école : quels contenus et pour quelle formation?. Fonds de recherche du Québec - Société et culture (FRQSC). soutien aux équipes de recherche. 196 544 $. (2016-2021)
  • Chaire de recherche. (Terminé). Collaborateur. Chaire de recherche sur l’intérêt des jeunes à l’égard des sciences et de la technologie (CRIJEST). 8 Commissions scolaires, U. de Sherbrooke et UQAM. CRIJEST. 830 000 $. (2012-2019)
  • Subvention. (Terminé). Cocandidat. Physical characteristics and perception of road bike component vibration transmission (NSERC-VROOMEN WHITE DESIGN-Cervélo). Conseil de Recherches en Sciences Naturelles et Génie du Canada (CRSNG). Collaborative Research and Development Grant. 590 686 $. (2010-2013)

Publications

Articles de revue

  • M.I.Alvarez-Fernandez, M.B.Prendes-Gero, J.M.Drouet, F.Lopez-Gayarre, J.Rodriguez-Vigil Junco. (2020). Application of genetic algorithms in the optimisation of steel rib supports. Tunnelling and Underground Space Technology 103 DOI. (Article publié).
  • Ayachi FS, Drouet J-M, Champoux Y, Guastavino C. (2018). Perceptual Thresholds for Vibration Transmitted to Road Cyclists. Human Factors DOI. (Article publié).
  • Perrier S*, Champoux Y, Drouet JM. (2017). The influence of a human hand-arm system on the vibrational dynamic behaviour of a compliant mechanical structure. Journal of Vibration and Control 23 (2), (Article publié).
  • Prendes-Gero MB, Álvarez-Fernández MI, López-Gayarre F, Drouet JM, Rodríguez-Vigil Junco J. (2016). Cost optimization of structures using a genetic algorithm with Eugenic Evolutionary theory. Structural and Multidisciplinary Optimization 54 (2), 199–213. (Article publié).
  • María-Belén Prendes-Gero, Martina-Inmaculada Álvarez-Fernández, Fernando López-Gayarre, Jean-Marc Drouet, Julio Rodríguez-Vigil Junco. (2016). Cost optimization of structures using a genetic algorithm with Eugenic Evolutionary theory. Struct Multidisc Optim 54 199–213. DOI. (Article publié).
  • Lépine J*,Champoux Y,Drouet J-M. (2015). The relative contribution of road bicycle components on vibration induced to the cyclist. Sports Engineering 18 (2), 79-91. (Article publié).
  • Lépine J*,Champoux Y,Drouet J-M. (2014). Road bike comfort: on the measurement of vibrations induced to cyclist. Sports Engineering 17 (2), 113-122. (Article publié).
  • Lépine J*,Champoux Y,Drouet J-M. (2013). A Laboratory Excitation Technique to Test Road Bike Vibration Transmission. Experimental Techniques (Article publié).
  • Cuillière J-C,Francois V,Drouet J-M. (2013). Automatic mesh generation and transformation for topology optimization methods. Computer-Aided Design 45 (12), 1489–1506. (Article publié).
  • Cuillière J-C,Francois V,Drouet J-M. (2013). Towards the Integration of Topology Optimization into the CAD Process. Computer-Aided Design and Applications 11 (2), 120-140. (Article publié).

Articles de conférence

  • Covill D, King R, Townsend J, Brickley G, Drouet J-M. (2020). Development of customized wheelchair racing gloves using digital fabrication techniques. MDPI, Japon, (Article soumis).
  • Drouet J-M, Covill D, Labrie A*. (2020). On The Effectiveness Of Suspension Stems In Reducing Vibration Transmitted To A Cyclist’s Hands In Road Cycling. MDPI, Japon, (Article publié).
  • Covill D, Drouet J-M, Arregui Velázquez A. (2020). The steel bicycle project: bringing together tube manufacturers, frame builders and engineers through sports engineering. MDPI, Japon, (Article publié).
  • Covill D,Drouet J-M. (2018). On the Effects of Tube Butting on the Structural Performance of Steel Bicycle Frames. MDPI, Australie, DOI. (Article publié).
  • Drouet J-M,Covill D,Duarte W*. (2018). On the exposure of hands to vibration in road cycling: an assessment of the effect of gloves and handlebar tape. MDPI, Australie, DOI. (Article publié).
  • Covill D,Allard P*,Drouet J-M,Emerson N. (2016). An assessment of bicycle frame behaviour under various load conditions using numerical simulations. Elsevier - Procedia Engineering, (Article publié).
  • Drouet J-M,Guastavino C,Girard N*. (2016). Perceptual thresholds for shock-type excitation of the front wheel of a road bicycle at the cyclist’s hands. Elsevier - Procedia Engineering, Pays-Bas, 724-729. DOI. (Article publié).
  • Lépine J*,Champoux Y,Drouet J-M. (2016). Test protocol for in-situ bicycle wheel dynamic comfort comparison. Elsevier - Procedia Engineering, Pays-Bas, 568-572. DOI. (Article publié).
  • Champoux Y, Lépine J*, Vanwallenghem J, Drouet J-M. (2015). Dynamic Calibration of an Instrumented Bike Brake Hood in Measuring Power Absorbed by the Hands. Procedia Engineering, 225–230. (Article publié).
  • Richard S*,Champoux Y, Lépine J*, Drouet J-M. (2015). Using an alternative forced-choice method to study shock perception at cyclists’ hands: the effect of tyre pressure. Procedia Engineering, 361–366. (Article publié).
  • Drouet J-M,Champoux Y. (2014). Designing a Strain Gauge Transducer for Dynamic Load Measurement in Cycling Using Numerical Simulation. Procedia Engineering, 304–309. (Article publié).
  • Pelland-Leblanc J-P,Lépine J*,Champoux Y,Drouet J-M. (2014). Effect of Structural Damping on Vibrations Transmitted to Road Cyclists. Conference Proceedings of the Society for Experimental Mechanics Series 2014, 283-290. (Article publié).
  • Pelland-Leblanc J-P,Lépine J*,Champoux Y,Drouet J-M. (2014). Using Power as a Metric to Quantify Vibration Transmitted to the Cyclist. Procedia Engineering, 392–397. (Article publié).
  • Champoux Y,Lépine J*,Gauthier P-A,Drouet J-M. (2013). A laboratory technique to compare road bike dynamic comfort. Conference Proceedings of the Society for Experimental Mechanics Series 2013, 99-106. (Article publié).
  • Cuillière J-C,Francois V,Drouet J-M. (2013). Automatic 3D Mesh Generation of Multiple Domains for Topology Optimization Methods. Proceedings of the 21st International Meshing Roundtable, 243-259. (Article publié).
  • Lépine J*,Champoux Y,Drouet J-M. (2013). Influence of Test Conditions on Comfort Ranking of Road Bicycle Wheels. Conference Proceedings of the Society for Experimental Mechanics Series 2013, 77-82. (Article publié).
  • Perrier S*,Champoux Y,Drouet J-M. (2013). Integrating Biodynamic Measurements in Frequency-Based Substructuring to Study Human-Structure Interaction. Conference Proceedings of the Society for Experimental Mechanics Series 2013, 1-8. (Article publié).

Autres contributions

Cours enseignés

  • Mathématiques de l'ingénieur II. IMC117. (2020-01-06 à 2020-04-13).Université de Sherbrooke. Canada. (3CR).
  • Résistance des matériaux II. IMC113. (2020-01-06 à 2020-04-13).Université de Sherbrooke. Canada. (2CR).
  • Communication technique. ING500. (2019-08-26 à 2019-12-05).Université de Sherbrooke. Canada. (2CR).
  • Résistance des matériaux I. IMC106. (2019-08-26 à 2019-12-05).Université de Sherbrooke. Canada. (3CR).
  • Statique. ING225. (2019-08-26 à 2019-12-05).Université de Sherbrooke. Canada. (3CR).

Présentations

  • Derek Covill. (2020). Development of customized wheelchair racing gloves using digital fabrication techniques (soumis). ISEA 2020 - The Engineering of Sport 13. Tokyo, Japon
  • Derek Covill. (2020). On The Effectiveness Of Suspension Stems In Reducing Vibration Transmitted To A Cyclist’s Hands In Road Cycling (soumis). ISEA 2020 - The Engineering of Sport 13. Tokyo, Japon
  • Derek Covill. (2020). The steel bicycle project: bringing together tube manufacturers, frame builders and engineers through sports engineering (soumis). ISEA 2020 - The Engineering of Sport 13. Tokyo, Japon
  • Derek Covill. (2018). On the Effects of Tube Butting on the Structural Performance of Steel Bicycle Frames. ISEA 2018 - The Engineering of Sport 12. Brisbane, Australie
  • (2018). On the Exposure of Hands to Vibration in Road Cycling: An Assessment of the Effect of Gloves and Handlebar Tape. ISEA 2018 - The Engineering of Sport 12. Brisbane, Australie
  • Catherine Guastavino. (2016). Just noticeable differences for whole-body vibration transmitted on a road bicycle. Annual conference of the North American Society for the Psychology of Sport and Physical Activity (NASPSPA) 2016. Montréal, Canada
  • (2016). Perceptual thresholds for shock-type excitation of the front wheel of a road bicycle at the cyclist’s hands. ISEA 2016 - The Engineering of Sport 11. Delft, Pays-Bas
  • (2016). Test protocol for in-situ bicycle wheel dynamic comfort comparison. ISEA 2016 - The Engineering of Sport 11. Delft, Pays-Bas
  • (2015). Using an alternative forced-choice method to study shock perception at cyclists’ hands: the effect of tyre pressure. 7th Asia-Pacific Congress on Sports Technology, APCST 2015. Barcelona, Espagne
  • (2014). Designing a strain gauge transducer for dynamic load measurement in cycling using numerical simulation. ISEA 2014 - The Engineering of Sport 10. Sheffield, Royaume-Uni
  • (2014). Using Power as a Metric to Quantify Vibration Transmitted to the Cyclist. ISEA 2014 - The Engineering of Sport 10. Sheffield, Royaume-Uni