Aller au contenu
Trouver un autre spécialiste

François Gitzhofer

Professeur associé, Faculté de génie
FAC. GÉNIE Chimique et biotechnologique

Présentation

Sujet de recherche

Revêtements, Nanomatériaux, Plasmas, Céramiques et verres

Disciplines de recherche

Génie des matériaux et génie métallurgique

Mots-clés

Synthèse par plasma de matériaux, barrières environnementales et thermiques, Caractérisation des matér, Chimie Inorg. combinatoir, Nanomatériaux, Plasma Inductif, Projection plasma, synthèse de céramiques, traitement de surface

Intérêts de recherche

Mes intérêts de recherche sont reliés à la découverte de nouveaux matériaux synthétisés par des technologies mises au point et brevetées au laboratoire des plasmas de l'Université de Sherbrooke. Ces technologies sont les plasmas inductifs thermiques, la technologie de projection des suspensions qui apporte beaucoup de flexibilité pour la synthèse des matériaux. Mes domaines de recherche sont les revêtements de barrières thermiques et environnementales pour les turbines d'avion, les matériaux en contact avec les métaux liquides, la catalyse, les bio-matériaux, les piles à combustibles de type à oxyde solide et les matériaux de type revêtements pour des applications avancées des propriétés des céramiques. Souvent du fait des défis en jeux, des nouveaux procédés peuvent être créés comme par exemple le développement d'un réacteur plasma très versatile pour la synthèse e structures variées de carbone ou encore le développement d'une torche à plasma à haute performance.

Langues parlées et écrites

Allemand, Anglais, Français

Diplômes

(1996). (Diplôme, Diplôme). Université de Sherbrooke.

(1988). (Doctorat, Doctorat). Université de Limoges.

(1984). (Équivalent de la maîtrise, DEA - Maîtrise). Université de Limoges.

(1984). (Baccalauréat, Diplôme d'ingénieur).

Titres de compétence

(2017) Consul Honoraire de France à Sherbrooke.

Ingénieur, membre de l'OIQ.

Prix et distinctions

  • (2022) Consul Honoraire de France en Estrie. Ministère des affaires étrangéres. (Honneur).
  • (2012) Session organiser for the biomaterials session. ASM/ITSC. (Distinction).
  • SAPHIR Congress organizer. SAPHIR european project. (Distinction).

Financement

  • Subvention. (Obtenu). Candidat principal. Mitacs accelerate PLASYNOC PLAsma SYnthesis of NanO Carbon with the support of KWI Polymers inc.. Mathematics of Information Technology and Complex Systems (MITACS). Accelerate. 93 333 $. (2020-2024)
  • Subvention. (Obtenu). Chercheur principal. Suspension plasma spraying. Conseil de Recherches en Sciences Naturelles et Génie du Canada (CRSNG). Discovery Grant. 378 000 $. (2017-2023)
  • Subvention. (Obtenu). Chercheur principal. Projet Mélimo. Conseil de Recherches en Sciences Naturelles et Génie du Canada (CRSNG). RDC. 369 783 $. (2017-2022)
  • Subvention. (Obtenu). Chercheur principal. Pyrotek inc Projet MeLiMo. Pyrotek inc.. CRD. 183 000 $. (2017-2022)
  • Subvention. (Obtenu). Chercheur principal. Centre québécois de recherche et de développement sur l'aluminium Projet MeLiMo. Centre québécois de recherche et de développement de l'aluminium (CQRDA). Support industry of Aluminum. 300 000 $. (2016-2022)
  • Subvention. (Obtenu). Cocandidat. Conversion of waste polymers to Carbon nanofilaments Contribution of Quebec to CRD. PRIMA Quebec. Support industry in nanotechnology. 300 000 $. (2017-2022)
  • Subvention. (Obtenu). Cocandidat. Conversion of waste polymers to carbon nanofilaments industry contribution. KWI inc and SOLENO. contribution for CRD. 300 000 $. (2017-2022)
  • Subvention. (Obtenu). Cochercheur. KWI Polymers. KWI Polymers Inc.. 285 000 $. (2017-2022)
  • Subvention. (Obtenu). Cochercheur. PRIMA Québec. PRIMA Québec. 300 000 $. (2017-2022)
  • Subvention. (Obtenu). Cochercheur. Projet KWI-Soleno-Prima. Conseil de Recherches en Sciences Naturelles et Génie du Canada (CRSNG). 300 000 $. (2017-2022)
  • Subvention. (Obtenu). Cochercheur. Soleno Inc.. Soleno Inc.. 15 000 $. (2017-2022)
  • Subvention. (Obtenu). Cochercheur. Surface Engineering Solutions for Aerospace: Terrestrial and Space Applications. Fondation Canadienne pour l'Innovation (FCI). 6 000 000 $. (2016-2021)
  • Subvention. (Obtenu). Collaborateur. Surface Engineering Solutions for Aerospace: Terrestrial and Space Applications. Fondation Canadienne pour l'Innovation (FCI). Innovation Fund. 3 624 371 $. (2016-2021)
  • Subvention. (Obtenu). Collaborateur. Surface Engineering Solutions for Aerospace: Terrestrial and Space Applications. Ministère de l'Éducation, du Loisir et du Sport (MELS) (Québec). Inovation Funds. 3 624 371 $. (2016-2021)
  • Subvention. (Obtenu). Chercheur principal. Fonds individuel de soutien à la recherche. Université de Sherbrooke. Fonds individuel de soutien à la recherche. 7 134 $. (2017-2021)
  • Bourse de recherche. (Obtenu). Chercheur principal. Supplément COVID-19. Conseil de Recherches en Sciences Naturelles et Génie du Canada (CRSNG). Supplément COVID-19. 3 840 $. (2020-2021)
  • Bourse de recherche. (Obtenu). Chercheur principal. Supplément COVID-19. Conseil de Recherches en Sciences Naturelles et Génie du Canada (CRSNG). Supplément COVID-19. 19 722 $. (2020-2021)
  • Subvention. (En cours d’évaluation). Cocandidat. Conversion of waste polymer to carbon nanofilaments NSERC CRD contribution. Conseil de Recherches en Sciences Naturelles et Génie du Canada (CRSNG). CRD. 600 000 $. (2017-2021)
  • Subvention. (Obtenu). Cochercheur. Projet ANR Archicap : Matériaux architecturés de phosphate de calcium substitué pour implants osseux bioactifs. Agence nationale de la recherche (ANR) (France). Projet ANR. 900 000 $. (2016-2020)
  • Subvention. (Obtenu). Candidat principal. Mitacs accelerate Amélioration de la résistance à la corrosion de réfractaires par des alliages d’aluminium en fusion supplementary year. Mathematics of Information Technology and Complex Systems (MITACS). Accelerate. 44 000 $. (2019-2019)
  • Subvention. (Obtenu). Chercheur principal. Études de revêtements permanents oxydes et non oxydes pour faciliter le démoulage de gueuses d'aluminium avec Aluminerie Alouette. Conseil de Recherches en Sciences Naturelles et Génie du Canada (CRSNG). Engage. 25 000 $. (2016-2019)
  • Subvention. (Obtenu). Chercheur principal. Mitacs accelerate Amélioration de la résistance à la corrosion de réfractaires par des alliages d’aluminium en fusion.. Mitacs. Stage Mitacs Accéleration. 162 000 $. (2016-2019)
  • Subvention. (Obtenu). Cochercheur. An international Network on New Strategies for Processing Calcium Phosphates. Commission des Communautés Européennes (Bruxelles). Marie Curie. 100 000 $. (2014-2018)
  • Subvention. (En cours d’évaluation). Cochercheur. Induction Plasma-based High-Speed Growth of Epitaxial and Nanostructured Functional Materials. Conseil de Recherches en Sciences Naturelles et Génie du Canada (CRSNG). Strategic Projects Grant. 462 000 $. (2015-2018)
  • Subvention. (Obtenu). Cochercheur. Déposition par plasma de suspensions assistée par diagnostics in-situ pour la croissance rapide de revêtements céramiques composites multiferroïques et magnétoélectriques. Fonds Québécois de la Recherche sur la Nature et les Technologies (FQRNT). Team Research Project. 229 570 $. (2014-2017)
  • Subvention. (Obtenu). Chercheur principal. Dépôt de barbotines par plasma-applications dans les réfractaires pour l'aluminium. Conseil de Recherches en Sciences Naturelles et Génie du Canada (CRSNG). Engage. 25 000 $. (2015-2015)
  • Contrat. (Terminé). Chercheur principal. Bombardier BRP inc. Projet ITO. Bombardier Produits Récréatifs Inc. (BRP). 6 000 $. (2014-2015)
  • Subvention. (Terminé). Candidat principal. Basic understanding of materials synthesis by plasma. Conseil de Recherches en Sciences Naturelles et Génie du Canada (CRSNG). Discovery Grant. 275 000 $. (2009-2013)
  • Subvention. (Terminé). Chercheur principal. Consortium recherche plasturgie et composites du Québec. Consortium recherche plasturgie et composites du Québec. 6 449 $. (2012-2012)

Publications

Articles de revue

  • Gitzhofer,F.;Aluha,J.;Langlois,P.;Barandehfard,F.;Ntho,T.;Abatzoglou,N. (2021). Proven anti-wetting properties of molybdenum tested for high temperature corrosion-resistance with potential application in the aluminum industry. Material 14 (18), (Article publié).
  • Barandehfard, F.;Aluha,J.;Gitzhofer,F. (2021). Synthesis of Cubic Aluminum Nitride (AlN) Coatings through Suspension Plasma Spray (SPS) Technology. Coatings 11 500. (Article publié).
  • S. Belbessai, I. E. Achouri, El Hadi Benyoussef, F. Gitzhofer and N. Abatzoglou. (2021). Toluene Steam Reforming Using Nickel Based Catalysts Made from Mining Residues. Catalysis Today 365 111-121. (Article publié).
  • Chambard, M., D. Remache, Y. Balcaen, O. Dalverny, J. Alexis, R. Siadous, R. Bareille, S. Catros, P. Fort, D. Grossin, F. Gitzhofer, G. Bertrand. (2020). Calcium phosphate coatings obtained via rf-Suspension Plasma Spraying (rf-SPS) under supersonic and subsonic conditions. Journal of Thermal Spray Technology (Article publié).
  • Chambard, M., D. Remache, Y. Balcaen, O. Dalverny, J. Alexis, R. Siadous, R. Bareille, S. Catros, P. Fort, D. Grossin, F. Gitzhofer, G. Bertrand. (2020). Effect of silver and strontium incorporation route on hydroxyapatite coatings elaborated by rf-SPS. Acta Materialia 12 (Article publié).
  • Barandehfard F , Aluha J , Hekmat-Ardakan A , Gitzhofer F. (2020). Improving Corrosion Resistance of Aluminosilicate Refractories towards Molten Al-Mg Alloy Using Non-Wetting Additives: A Short Review. Materials (Basel, Switzerland) 13 (18), (Article publié).
  • Hou, Huidong; Veilleux, Jocelyn; Gitzhofer, François; Wang, Quansheng. (2020). Study of the microstructural control of Ba(Mg1/3Ta2/3)O3 perovskite thermal barrier coating deposited by solution precursor plasma spray. Surface and Coatings technology 389 (15may2020), (Article publié).
  • Hou, Huidong Veilleux, Jocelyn; Gitzhofer, François; Wang, Quanshen. (2020). Vertical grain and columnar structured Ba(Mg1/3Ta2/3)O3 thermal barrier coating deposited by solution precursor plasma spray. Surface and coatings technology 393 (15july2020), (Article publié).
  • Azara, A., El-Hadi Benyoussef, F. Mohellebi, M. Chamoumi, F. Gitzhofer and N. Abatzoglou. (2019). Catalytic Dry Reforming and Cracking of Ethylene for Carbon Nanofilaments and Hydrogen Production Using a Catalyst Derived from a Mining Residue. Catalysts 9 (12), 1069-1102. (Article publié).
  • Chambard, M., O. Marsan, C. Charvillat, D. Grossin, P. Fort, C. Rey, F. Gitzhofer and G. Bertrand. (2019). Effect of the deposition route on the microstructure of plasma-sprayed hydroxyapatite coatings. Surface and Coatings Technology 371 68-77. (Article publié).
  • Hou, H., J. Veilleux, F. Gitzhofer, Q. Wang, L. Quansheng and Y. Liu. (2019). Hybrid Suspension/Solution Precursor Plasma Spraying of a Complex Ba(Mg1/3Ta2/3)O3 Perovskite: Effects of Processing Parameters and Precursor Chemistry on Phase Formation and Decomposition. Journal of Thermal Spray Technology 28 (1-2), 12-26. (Article publié).
  • Zhang, Juan ; Sweedy, Ahmed ; Gitzhofer, François ; Baroud, Gamal. (2018). A novel method for repeatedly generating speckle patterns used in digital image correlation. Optics and Lasers in Engineering 100 (January), 259-266. (Article publié).
  • J. Aluha, F. Gitzhofer, N. Abatzoglou. (2018). Application of Plasma Technology in Fischer-Tropsch Catalysis for the Production of Synthetic Fuels. Recent Advances in Petrochemical Science (RAPSCI) 5 (2), 001-011. (Article publié).
  • Aluha, J.; Gitzhofer, F.; Gutierrez, S.; Abatzoglou, N. (2018). Use of Plasma-Synthesized Nano-Catalysts for CO Hydrogenation in Low-Temperature Fischer–Tropsch Synthesis: Effect of Catalyst Pre-Treatment. Nanomaterials 8 (822), (Article publié).
  • Harbec, D. ; Zidol, A. ; Tagnit-Hamou, A. 1. (2017). Mechanical and durability properties of high performance glass fume concrete and mortars. Construction and Building Materials 134 (March 1), 142-156. (Article publié).
  • Darthout Émilien; François Gitzhofer. (2017). Structure stabilization by zirconia pinning effect of Y2Si2O7environmental barrier coatings synthesized by solution precursor plasma spraying process. Surface and Coatings Technology 309 (January), 1081-1088. (Article publié).
  • É. Darthout, and F. Gitzhofer. (2017). Thermal cycling and high temperature corrosion tests of rare earth silicate environmental barrier coatings. J. Therm. Spray Technol. 26 (8), 1823-1837. (Article publié).
  • Darthout, Émilien; Laduye, Guillaume; Gitzhofer, François. (2016). Processing Parameter Effects and Thermal Properties of Y2Si2O7Nanostructured Environmental Barrier Coatings Synthesized by Solution Precursor Induction Plasma Spraying. Journal of Thermal Spray Technology 25 (7), 1264-1279. (Article publié).
  • É. Darthout, and F. Gitzhofer. (2016). Structure stabilization by zirconia pinning effect of Y2Si2O7 environmental barrier coatings synthesized by solution precursor plasma spraying process. Journal of Thermal spraying, special issue 2017 (Article soumis).
  • James Aluha, Kossi Bere, Nicolas Abatzoglou, François Gitzhofer. (2016). Synthesis of Nano-catalysts by Induction Suspension Plasma Technology (SPS) for Fischer–Tropsch Reaction. Plasma Chemistry and Plasma Processing 36 (5), 1325-1348. (Article publié).
  • D. Harbec, A. Tagnit-Hamou, F. Gitzhofer,. (2016). Waste-glass fume synthesized using plasma spheroidization technology: Reactivity in cement pastes and mortars. Construction and Building Materials 107 272-286. (Article publié).
  • Max Loszach and François Gitzhofer. (2015). Induction Suspension Plasma Sprayed Biological like Hydroxyapatite Coatings. Journal of Biomaterials Applications 29 (9), 1256-1271. (Article publié).
  • Michel Sonntag François Gitzhofer Michel Lejeune. (2015). La place de la recherche en sciences humaines, sociales et économiques dans les écoles d’ingénieurs : bilan et perspectives. Phronesis 4 (2), 1-4. (Article publié).
  • Harbec, D. Bahri, H. Tagnit-Hamou, A. Gitzhofer, F. (2015). New Silica Fume From Recycled Waste Glass. Nanotechnology in Construction 407-414. (Article publié).
  • Darthout, Émilien, Quet, Aurélie; Braidy, Nadi; Gitzhofer, François. (2014). Lu2O3-SiO2-ZrO2 coatings for environmental barrier application by solution precursor plasma spraying and influence of precursor chemistry. Journal of Thermal Spray Technology 23 (3), 325-332. (Article publié).
  • WEI-CHAO GUO; RAUCHS, GAST; PAPELEUX, LUC; WEI-HONG ZHANG; GITZHOFER, FRANÇOIS; PONTHOT, JEAN-PHILIPPE. (2012). Evaluation of the mechanical properties of plasma-sprayed coating by nanoindentation technology. Mechanics & Industry 13 (3), 151-162. (Article publié).
  • Rivard, T., Gitzhofer, F., Abatzoglou, N. (2012). Geometrical triple phase boundary length measurement using focused ion beam tomography. Canadian Journal of Chemical Engineering 90 (3), 712-718. (Article publié).
  • Mirfakhraei, B., Birss, V., Thangadurai, V., Paulson, S., Béré, K.E., Gitzhofer, F. (2011). Electrochemical performance and H 2S poisoning study of mo-doped ceria (CMO) SOFC anodes. ECS Transactions 35 (2), 1727-1734. (Article publié).
  • Tufa, K.Y., Gravelle, D., Gitzhofer, F. (2011). Exergy analysis of a dc plasma spraying of polymer/Al2O3 composite coating. High Temperature Material Processes 15 (4), 259-265. (Article publié).
  • Harbec, D.; Gitzhofer, F.; Tagnit-Hamou, A. (2011). Induction plasma synthesis of nanometric spheroidized glass powder for use in cementitious materials. Detail Only Available. Powder Technology 214 (3), 356-364. (Article publié).
  • Yan Shen; Almeida, Veronica B.; Gitzhofer, François. (2011). Preparation of Nanocomposite GDC/LSCF Cathode Material for IT-SOFC by Induction Plasma Spraying. Journal of Thermal Spray Technology 20 (1), 145-153. (Article publié).
  • Metcalfe, C., Kesler, O., Rivard, T., Gitzhofer, F., Abatzoglou, N. (2010). Connected three-phase boundary length evaluation in modeled sintered composite solid oxide fuel cell electrodes. Journal of the Electrochemical Society 157 (9), B1326-B1335. (Article publié).
  • Blanchard, J., Abatzoglou, N., Eslahpazir-Esfandabadi, R., Gitzhofer, F. (2010). Fischer - Tropsch synthesis in a slurry reactor using a nanoiron carbide catalyst produced by a plasma spray technique. Industrial and Engineering Chemistry Research 49 (15), 6948-6955. (Article publié).
  • Jia, Lu; Gitzhofer, François. (2010). Induction Plasma Synthesis of Nano-Structured SOFCs Electrolyte Using Solution and Suspension Plasma Spraying: A Comparative Study. Journal of Thermal Spray Technology 19 (3), 566-574. (Article publié).
  • Habib, M., Baroud, G., Gitzhofer, F., Bohner, M. (2010). Mechanisms underlying the limited injectability of hydraulic calcium phosphate paste. Part I{cyrillic, ukrainian}I{cyrillic, ukrainian}: Particle separation study. Acta Biomaterialia 6 (1), 250-256. (Article publié).
  • Robin, Philippe; Gitzhofer, François; Fauchais, Pierre; Boulos, Maher. (2010). Remaining Fatigue Life Assessment of Plasma Sprayed Thermal Barrier Coatings. Journal of Thermal Spray Technology 19 (5), 911-920. (Article publié).
  • Fauteux-Lefebvre, Clémence; Abatzoglou, Nicolas; Blanchard, Jasmin; Gitzhofer, François. (2010). Steam reforming of liquid hydrocarbons over a nickel–alumina spinel catalyst. Journal of Power Sources 195 (10), 3275-3283. (Article publié).
  • Jia, L., Gitzhofer, F. (2009). Nano-particle sizing in a thermal plasma synthesis reactor. Plasma Chemistry and Plasma Processing 29 (6), 497-513. (Article publié).
  • Fauteux-Lefebvre, C., Abatzoglou, N., Blanchard, J., Gitzhofer, F. (2009). Steam reforming of hexadecane over a NI-alumina spinel catalyst. Canadian Journal of Chemical Engineering 5 (1), 516-521. (Article publié).
  • Metcalfe, C., Kesler, O., Rivard, T., Gitzhofer, F., Abatzoglou, N. (2009). Three-phase boundary length evaluation in modeled sintered composite solid oxide fuel cell electrodes. ECS Transactions 25 (285-1941), 11. (Article publié).
  • Mostajeran Goortani, Behnam; Gitzhofer, François; Bouyer, Etienne; Mousavi, Mehdi. (2009). Ultrafast Thermal Plasma Preparation of Solid Si Films with Potential Application in Photovoltaic Cells: A Parametric Study. Journal of Thermal Spray Technology 18 (1), 50-57. (Article publié).
  • Jankhah, Sepideh; Abatzoglou, Nicolas; Gitzhofer, François; Blanchard, Jasmin; Oudghiri-Hassani, Hicham. (2008). Catalytic properties of carbon nano-filaments produced by iron-catalysed reforming of ethanol. Chemical Engineering Journal 139 (3), 532-539. (Article publié).
  • Gitzhofer, François; Lu Jia. (2008). Induction Plasma Technology Applied to Materials Synthesis for Solid Oxide Fuel Cells. International Journal of Applied Ceramic Technology 5 (6), 537-547. (Article publié).
  • Habib, M., Baroud, G., Gitzhofer, F., Bohner, M. (2008). Mechanism of phase separation during the injection of a calcium phosphate hydraulic paste. 8th World Biomaterials Congress v1 1-10. (Article publié).
  • Habib, M., Baroud, G., Gitzhofer, F., Bohner, M. (2008). Mechanisms underlying the limited injectability of hydraulic calcium phosphate paste. Acta Biomaterialia 4 (5), 1465-1471. (Article publié).
  • Siegmann, S., Girshick, S.L., Szepvolgyi, J., Leparoux, M. Shin, J.-W., Schreuders,C., Rohr, L.,Ishigaki, T.,Jurewicz J.W., Baroud G., Gitzhofer F., Kambara M., Diaz J.M.A, Yoshida T. (2008). Nano powder synthesis by plasmas: Report of the session held at the international round table on thermal plasma fundamentals and applications - Held in Sharm el Sheikh Egypt - Jan. 14-18 2007. High Temperature Material Processes 12 (3-4), 205-254. (Article publié).
  • Blanchard, Jasmin; Oudghiri-Hassani, Hicham; Abatzoglou, Nicolas; Jankhah, Sepideh; Gitzhofer, François. (2008). Synthesis of nanocarbons via ethanol dry reforming over a carbon steel catalyst. Chemical Engineering Journal 143 (1-3), 186-194. (Article publié).
  • Jankhah, Sepideh; Abatzoglou, Nicolas; Gitzhofer, François. (2008). Thermal and catalytic dry reforming and cracking of ethanol for hydrogen and carbon nanofilaments' production. International Journal of Hydrogen Energy 33 (18), 4769-4779. (Article publié).

Articles de conférence

  • Hou, Huidong; Veilleux, Jocelyn; Gitzhofer, Frangois; Wang, Quansheng. (2019). Dense to columnar microstructure evolution of Ba(Mg1/3Ta2/3)O3 TBCs through tailoring of suspension plasma spray conditions. Proceedings of the International Thermal Spray Conference 2019, p178-184. (Article accepté).
  • Chambard, M. Bertrand, G. Gitzhofer, F. (2019). Effect of Ag and Sr incorporation route on HA coatings obtained by rf-SPS. MatSan. (Article publié).
  • Huidong, H. Veilleux, J. Gitzhofer, F. Wang, Q. (2019). Effect of Precursor Chemistry on the microstructure of Ba(Mg1/3Ta2/3)O3 during Hybrid Suspension/Solution Precursor Plasma Spraying. ISPC-Conference.org, (Article publié).
  • Fournier, M. C. Gitzhofer F. (2019). Influence of precursors and liquid on ZrB2 SPS coatings. Thermal Spray of Suspensions & Solutions Symposium + EBCs 2019 (TS4E 2019). (Article publié).
  • Aluha, J. Fournier, M. C. Barandehfard, F. Langlois, P. O. Eyadema Béré, K. Abatzoglou, N. Gitzhofer, F. (2019). Mo-based coating with anti-wetting properties for high temperature applications: Synthesis by plasma technology. ISPC-Conference.org, (Article publié).
  • Fournier, M. C. Aluha, J. Barandehfard, F. Eyadema Béré, K. Langlois, P. O. Gitzhofer, F. (2019). SPS Induction Plasma Synthesized ZrB2 Coatings for the Al Industry. ISPC-Conference.org, (Article publié).
  • Barandehfard, F. Eyadéma Béré, K. Gitzhofer, F. (2019). Synthesis of Aluminium Nitride Nano-powder using Induction Plasma Technology: Effect of Feedstock Molar Ratio and Reactor Pressure. ISPC-Conference.org, (Article publié).
  • Chambard, M. Bertrand, G. Gitzhofer, F. (2018). APS vs SPS : nouvelles opportunités pour les implants orthopédiques revêtus. Journées Matériaux pour la santé. (Article publié).
  • Chambard, M., Bertrand, G. Gitzhofer, F. (2017). Effect of the precursor on the microstructure of plasma sprayed hydroxyapatite coatings: Powders for APS versus suspension chemistry for RF-SPS. RIPT 8. (Article publié).
  • Hou, H. Veilleux, J. Gitzhofer, F. (2017). Hybrid suspension/solution precursor plasma spraying of a complex Ba(Mg1/3Ta2/3)O3 perovskite: effects of the processing parameters and precursor chemistry on the phase formation and decomposition. ISPC-Conference.org, (Article publié).
  • Aluha, J. Abatzoglou N. Gitzhofer, F. (2017). Plasma-synthesized carbon-supported nano-catalysts for Fischer-Tropsch synthesis. ISPC-Conference.org, (Article publié).
  • J Aluha, N Abatzoglou, F Gitzhofer. (2017). Production of active carbon-supported Fischer-Tropfsch nan-catalysts using inductuion suspension plasma-spray (SPS) technology. ISPC-Conference.org, Canada, 206-216. (Article publié).
  • Gitzhofer, F. (2016). Keynote Speaker on Suspension plasma spraying. Suspension Plasma Spraying. (Article publié).
  • Gitzhofer,F. (2016). Key note presentation on Suspension Plasma Spraying. Annonce de la conférence, (Article publié).
  • Gitzhofer, F. Nicolas Abatzoglou, Sascha Kersten. (2015). A review on plasma technologies applied to thermos-chemical biomass conversion. The Netherlands Dietrich Meier, Thünen Institute of Wood Research, Germany Eds, ECI Symposium Series, (Article publié).
  • Faivre F., M. Loszach, D. Grossin, G. Bertrand, F. Gitzhofer. (2014). A study of the suspension induction plasma spraying parameters to reduce the decomposition of hydroxyapatite coatings. HTTP Proceedings, (Article publié).
  • Gitzhofer, F. (2014). Carbides and Metallic Alloys Synthesis by Suspension Plasma Spraying. 6th S2TS International Workshop on Suspensions and Solution Plasma Spraying Proceedings, (Article publié).
  • Faivre F., D. Grossin, G. Bertrand, F. Gitzhofer. (2014). Design of bioactive substituted apatite coatings synthesized by SPS in an inductively coupled plasma. Bioceramics Proceedings, (Article publié).
  • Faivre, F., D. Grossin, G. Bertrand, F. Gitzhofer. (2014). Design of bioactive substituted apatite coatings synthesized by suspension spraying in an inductively coupled plasma. ITSC Proceedings, (Article publié).
  • Gitzhofer, F. (2013). Advanced Fuel Cell Systems for the Transportation Sector. Quebec Vermont Bio-Energy Challenge Bishop’s University Proceedings, (Article publié).
  • Habib M, M. Loszach, F. Gitzhofer, G. Baroud. (2013). Wet-chemical process to synthesis the biphasic calcium-phosphate powder. 23rd Interdisciplinary Research Conference GRIBOI Proceedings, (Article publié).
  • Lefebvre, F. M. Loszach, F. Gitzhofer. (2012). Dopants multiples pour HA. Colloque annuel de Plasma-Québec Proceedings, (Article publié).
  • Shen, Y. and F. Gitzhofer. (2012). Induction plasma synthesis of nanostructured SOFCs. HTPP12 Proceedings, (Article publié).
  • Guo, M., F. Gitzhofer, Y. Shen, L. Jia. (2011). A review of induction plasma technology applied for SOFC at Université de Sherbrooke. ISPC 20 Proceedings, (Article publié).
  • Gitzhofer, F. (2011). Cours sur les biomatériaux. ENSIL Proceedings, (Article publié).
  • Loszach, M., F. Gitzhofer. (2011). Fabrication and dissolution behavior of as-sprayed and heat treated biological-like apatite. ISPC20 Proceedings, (Article publié).
  • Shen, Y., F. Gitzhofer. (2011). GDC/LSCF Composite Nanopowder Preparation for IT-SOFC by Induction Plasma Spraying. ISPC 20 Proceedings, (Article publié).
  • Gitzhofer, F. (2011). Induction plasma nanopowder synthesis, application in the energy, biomedical and construction fields. 3rd International Round Table on Thermal Plasmas for Industrial Applications Proceedings, (Article publié).
  • Harbec, D. A. Tagnit-Hamou, F. Gitzhofer. (2011). La fume de silice et les plasmas inductifs. Colloque annuel de Plasma-Québec Proceedings, (Article publié).
  • Gitzhofer, F., P. Turcot. (2011). Le bilan après 10ans, d’un partenariat de recherche entre la compagnie NAP GLADU et l’université de Sherbrooke. 79e Congrès de l’ACFAS Proceedings, (Article publié).
  • Darthout, É., F. Gitzhofer. (2011). Lutetium disilicate nanostructured coatings for environmental barrier application produced by solution plasma spraying. ISPC 2011 Proceedings, (Article publié).
  • Shen,Y., F. Gitzhofer. (2011). Nanocomposite powder synthesis by induction plasma and application in cathodes plasma spraying for SOFCs. Colloque annuel de Plasma-Québec Proceedings, (Article publié).
  • Gitzhofer, F. (2011). Nanopowder Synthesis using the Induction Plasma Technology, with Applications in the Energy, Biomedical and Construction Fields. 5th RIPT ENSIL Proceedings, (Article publié).
  • Gitzhofer, F.,. (2011). On the Quest of Medium Temperature, Low Thermal Mass, Low Carbon Imprint, Adiabatic, SOFCs using Induction Plasma Technology. LCES-2011 Proceedings, (Article publié).
  • Blanchard J., N. Abatzoglou, F. Gitzhofer. (2011). Phenomenological Kinetics of a Solid-Fluid Catalytic Reaction: The case of Fischer-Tropsch Synthesis with Plasma-derived Nano-Iron Carbides. 19th European Biomass Conference & Exhibition Refereed Proceedings, (Article publié).
  • Darthout, E., F. Gitzhofer. (2011). Processing parameters effects and thermal properties of Y2Si2O7 nanostructured coating synthesized by solution precursors plasma spraying. 5th S2TS - International Workshop on Suspension and Solution Thermal Spraying Proceedings, (Article publié).
  • Darthout, E., F. Gitzhofer. (2011). Revêtements nanostructurés de disilicate de lutétium produits par plasma inductif à partir de précurseurs liquides pour barrières environnementales. Plasma-Québec Proceedings, (Article publié).
  • Loszash, M., F. Gitzhofer. (2010). Development and chararcterization of a biological-like apatite based on a suspension by inductive plasma. 4th S2TS, International Workshop on Solution and Suspension Thermal Spraying Proceedings, (Article publié).
  • Gitzhofer, F. (2010). Dépôt de plasma de revêtements céramiques nanostructurés, chambre combinatoire. 1ère Journée nanomatériaux Proceedings, (Article publié).
  • Almeida, V. A.B., L. Jia, F. Gitzhofer. (2010). Dépôt par plasma inductif SolPS des couches gradées en utilisant un système d'alimentation. Colloque Plasma-Québec Proceedings, (Article publié).
  • Habib M, M. Bohner, F. Gitzhofer, G. Baroud. (2010). Investigating the effect of the permeability on the injectability of calcium phosphate pastes. 20th Interdisciplinary Research Conference on Injectable Osteoarticular Biomaterials and Bone Augmen, (Article publié).
  • Darthout, E.,, F. Gitzhofer. (2010). La résistance aux cycles thermiques des dépôts nanostructurés de Lu2Si2O7-xZrSiO4 élaborés par plasma inductif. Colloque Plasma-Québec Proceedings, (Article publié).
  • Darthout, Émilien, F. Gitzhofer. (2010). Lutetium disilicate coatings development to protect SiC/SiC composites against hot water vapor corrosion. 4th S2TS, International Workshop on Solution and Suspension Thermal Spraying Proceedings, (Article publié).
  • Shen, Y., F. Gitzhofer. (2010). Nanocomposite GDC/LSCF Cathode Material Synthesis for IT-SOFC by Induction Plasma Spaying. Colloque Plasma-Québec Proceedings, (Article publié).
  • Shen, Y., F. Gitzhofer, V. Almeida. (2010). Preparation of nanocomposite GDC/LSCF cathode material for IT-SOFC by RF induction plasma spraying. International Thermal Spray Conference and Exposition Proceedings, (Article publié).
  • Harbec, D., A.Tagnit-Hamou, F. Gitzhofer. (2010). Sphéroïdisation de poudres de verre par torche à plasma inductif pour application dans les matériaux cimentaires. Colloque Plasma-Québec Proceedings, (Article publié).
  • Gitzhofer, F. (2010). Synthèse de nanostructures pas plasma inductif. Présentation Chimie ParisTech Proceedings, (Article publié).
  • Gitzhofer, F. (2010). Synthèse par plasma de matériaux nanostructures. Entretiens Jacques Cartier Proceedings, (Article publié).
  • Rivard, T., F. Gitzhofer, N. Abatzoglou, O. Kesler, M. Craig Metcalfe. (2010). Une méthode tomographique pour calculer la longueur de la couche limite triphasée d’une cathode SOFC : Analyse de la sommation des voxels. ACFAS Proceedings, (Article publié).
  • Blanchard, J., R. Eslahpazir Esfandabadi, F. Gitzhofer, N. Abatzoglou. (2010). Utilisation du plasma inductif pour la production par atomisation d'un catalyseur nanométrique de carbure de fer pour la synthèse Fischer-Tropsch. Colloque Plasma-Québec Proceedings, (Article publié).
  • Darthout, É., F. Gitzhofer. (2010). Élaboration de revêtements nanostructurés de Lu2Si2O7-xZrSiO4 élaborés par plasma inductif. Plasma Québec Proceedings, (Article publié).
  • Guo, W., F. Gitzhofer, L. Jia, G. Rauchs, W. Zhang, J. Ponthot. (2009). Evaluating the mechanical properties of plasma sprayed coatings by nanoin-dentation. 19th International Symposium on Plasma Chemistry Proceedings, (Article publié).
  • Habib M., F. Gitzhofer, M. Bohner, G. Baroud. (2009). Mechanisms underlying the limited injectability of hydraulic calcium phosphate paste: part II. Particle separation study. GRIBOI 2009 Proceedings, 104. (Article publié).
  • L. Jia, F. Gitzhofer. (2009). Nano-structured Electrolyte Coatings Prepared by Spraying of Suspensions. The 9th Asia-Pacific Conference on Plasma Science and Technology (APCPST) Proceedings, (Article publié).
  • Gitzhofer, F., G. Baroud, N. Faucheux. (2009). Plasma synthesised Nanomaterials for existing and potential biomedical applications. International Round Table on Thermal Plasmas Proceedings, (Article publié).
  • Jia, L., F. Gitzhofer. (2009). Preparation of Nano-structured Dense and Thin Electrolyte for SOFCs by Suspension Plasma Spraying. 19th International Symposium on Plasma Chemistry Proceedings, (Article publié).
  • Bolduc, I., F. Gitzhofer, P. Proulx. (2009). Synthesis of alloyed metal powders produced by induction plasma. 19th International Symposium on Plasma Chemistry Proceedings, (Article publié).
  • Metcalfe, C., Lesler, O., Rivard, T., Gitzhofer, F. (2008). Amethod for Calculation of three Phase Boundary Length in Modeled Composite Electrodes for Solid Oxide Fuel Calls. 58th Canadian Chemical Engineering Conf Proceedings, (Article publié).
  • L. Jia, F. Gitzhofer. (2008). Development of a Dynamic Masking System for Improving the Quality of Plasma Sprayed Coatings. Thermal Spray Crossing Borders, Int. Thermal Spray Conference & Exposition Proceedings, (Article publié).
  • Fradet, M., Gitzhofer, F. (2008). Influence of the Precursors Composition on Plasma-Sprayed Hydroxyapatite. 18th Interdisciplinary Research Conference GRIBOI Proceedings, (Article publié).
  • Gitzhofer, F. (2008). Personal Protection and secure industrial production. NANO SAFE Proceedings, (Article publié).
  • Blanchard, J., Eslahpazir Esfandabadi, R., Gitzhofer, F,. Abatzoglou, N,. (2008). Plasma-synthesized Nanocatalysts for Green Diesel Synthesis via Fisher-Tropsch in 3-phase slurry Reactors: Preliminary Results. 58th Canadian Chemical Engineering Conf Proceedings, (Article publié).
  • L. Jia, F. Gitzhofer. (2008). Preparation of Nano-structured SOFC Electrolyte Coating by Radio Frequency Suspension Plasma Spraying. Thermal Spray Crossing Borders, Int. Thermal Spray Conf. & Expo. Proceedings, (Article publié).
  • Fauteux-Lefebre, C., Blanchard, J., Gitzhofer, F., Abatzoglou, N. (2008). Stream Reforming of Hexadecane over Micrometric Nickel Catalysts. 58th Canadian Chemical Engineering Conf. Proceedings, (Article publié).
  • Gitzhofer, F., Habib, M., Damia, C., Bohner, M., Baroud, G. (2008). Suspension Induction-Plasma Spraying of a-TCP. 18th Interdisciplinary Research Conference On Injectable Biomaterials/ Biomechanics for Minimally In, (Article publié).
  • Gitzhofer F., M. Habib, C. Damia, M. Bohner, G. Baroud. (2008). Suspension induction plasma spraying of a-TCP. GRIBOI 2008 Proceedings, 49. (Article publié).
  • Rivard, T., Gitzhofer, F., Abatzaglou, N., Metcalfe, C. (2008). Verification of a Characterization Tool of Triple Phase Boundary Length Measurement in Porous Composite Cathodes using Tomography. 58th Can. Chem. Eng Conf. Proceedings, (Article publié).
  • Metcalfe, C., Kesler, O., Rivard, T., Gitzhofer, F., Abatzoglou, N. A Method for Calculation of three Phases Boundary Length in Modeled Composite Electrodes fo Solid Oxide Fuel Cells. 58th Can. Chem. Eng. Conf. Proceedings, (Article publié).
  • Proulx, P., F. Gitzhofer. Induction plasma nano-particles synthesis mod-elling - review and applications. 19th International Symposium on Plasma Chemistry Proceedings, (Article publié).
  • Calabretta, D., F. Gitzhofer, B. Davis. Induction plasma synthesis of dense oxide ion layers for reverse combustion in the anhydrous molten salt Na–B-O-H system. International Thermal Spray Conference Proceedings, (Article publié).
  • Gitzhofer, F., A. Vardelle, C. Chazelas, C. Marchand, G. Mariaux, H. Lorcet, D. Guenadou. Liquid materials processing: A challenge for thermal plasmas. 19th International Symposium on Plasma Chemistry Proceedings, (Article publié).
  • J Aluha, N Abatzoglou, F Gitzhofer. Production of active Carbon-supported Fischer-Tropsch Nano-catalysts usingInduction Suspension Plasma Spray (SPS) Technology. Réseau Biofuelnet Canada.
  • Harbec, D., A. Tagnit-Hamou, F. Gitzhofer. RF Plasma Glass Nanoparticles As Alternative Supplementary Cementitious Material. 3rd International Symposium on Nanotechnology in Construction Proceedings, (Article publié).
  • Mostajeran Goortani, B., F. Gitzhofer, E. Bouyer, M.Mousavi. Ultra Fast Thermal Plasma Preparation of Solid Si Films for Photovoltaic Cells. Commissariat à l'Énergie Atomique (CEA) Proceedings, (Article publié).

Propriétés intellectuelles

Brevets

  • Nicolas Abatzoglou, Clémence Fauteux-Lefebvre, Jasmin Blanchard, François Gitzhofer,. (2014). Steam reforming of hydrocarbonaceous fuels over a ni-alumina spinel catalyst. US20150069300 A1. États-Unis. (En instance).
  • Mostajeran Goortani; Behnam; Gitzhofer; Francois; Bouyer; Etienne;. (2011). METHOD OF PRODUCTION OF SOLID AND POROUS FILMS FROM PARTICULATE MATERIALS BY HIGH HEAT FLUX SOURCE. 20110057358. États-Unis. (En instance).
  • Abatzoglou, N. Gitzhofer, F. Laroche,Y. Novel autothermal pyrolyser. Canada. (En instance).
  • F Gitzhofer, K. Béré, Simon Durham, T. Vom Braucke. Suspension plasma spraying of nitrides. États-Unis. (En instance).

Licences

  • Suspension plasma technology. (1998). (Licence obtenue).

Autres contributions

Cours enseignés

  • Analyse énergétique des procédés, GCH301. Université de Sherbrooke. Canada.

Activités de collaboration internationale

  • Co-researcher. France. ANR avec L'ENSCIACET Toulouse sur la fabrication de revêtements pour des applications de reconstruction du squelette.
  • Co-researcher. Chine. Échanges sur le thème de la projection de suspensions avec l'institut des poudres de l'Académie des sciences de Guangdong à Guangzhou en Chine.
  • co participant. Lettonie. Programme européen Marie-Curie pour les échanges d'étudiants entre l'Europe et notre laboratoire, dans le domaine des biomatériaux.
  • Quebec Coordinator. France.
  • Co-researcher. France. I am taking part of the Marie-Curie European fund in the frame of the 7th framework program.

Présentations

  • Faivre F., M. Loszach, D. Grossin, G. Bertrand. (2014). A study of the suspension induction plasma spraying parameters to reduce the decomposition of hydroxyapatite coatings. HTPP Toulouse. Toulouse, France
  • (2014). Carbides and Metallic Alloys Synthesis by Suspension Plasma Spraying. 6th S2TS International Workshop on Suspensions and Solution Plasma Spraying. Tours, France
  • Faivre F., D. Grossin, G. Bertrand. (2014). Design of bioactive substituted apatite coatings synthesized by SPS in an inductively coupled plasma. Bioceramics Barcelone. Barcelona, Espagne
  • Faivre, F., D. Grossin, G. Bertrand. (2014). Design of bioactive substituted apatite coatings synthesized by suspension spraying in an inductively coupled plasma. ITSC Barcelone 2014. Barcelona, Espagne
  • (2013). Advanced Fuel Cell Systems for the Transportation Sector. Quebec Vermont Bio-Energy Challenge Bishop’s University. Sherbrooke, Canada
  • Habib M, M. Loszach, G. Baroud. (2013). Wet-chemical process to synthesis the biphasic calcium-phosphate powder Book of proceedings. 23rd Interdisciplinary Research Conference GRIBOI. États-Unis
  • (2012). Dopants multiples pour HA. Colloque annuel de Plasma-Québec. Montreal, Canada
  • Shen, Y. (2012). Induction plasma synthesis of nanostructured SOFCs. HTPP12, Bologne. Bologne, Italie
  • (2011). Cours sur les biomatériaux. ENSIL. Limoges, France
  • (2011). Induction plasma nanopowder synthesis, application in the energy, biomedical and construction fields. 3rd International Round Table on Thermal Plasmas for Industrial Applications Glenburn Lodge, Muldersdrift. Johannesburg, Afrique du Sud
  • Harbec, D. A. Tagnit-Hamou. (2011). La fumée de silice et les plasmas inductifs. Colloque annuel de Plasma- Québec. Montreal, Canada
  • Shen,Y. (2011). Nanocomposite powder synthesis by induction plasma and application in cathodes plasma spraying for SOFCs. Colloque annuel de Plasma-Québec. Montreal, Canada
  • (2011). Nanopowder Synthesis using the Induction Plasma Technology, with Applications in the Energy, Biomedical and Construction Fields. 5th RIPT ENSIL. Limoges, France
  • Blanchard J., Abatzoglou N. (2011). Phenomenological Kinetics of a Solid-Fluid Catalytic Reaction: The case of Fischer-Tropsch Synthesis with Plasma-derived Nano-Iron Carbides. Refereed Proceedings of the 19th European Biomass Conference & Exhibition. Berlin, Allemagne
  • (2011). Processing parameters effects and thermal properties of Y2Si2O7 nanostructured coating synthesized by solution precursors plasma spraying. 5th S2TS - International Workshop on Suspension and Solution Thermal Spraying. Tours, France
  • (2011). Revêtements nanostructurés de disilicate de lutétium produits par plasma inductif à partir de précurseurs liquides pour barrières environnementales. Colloque annuel Plasma-Québec. Montreal, Canada
  • (2010). Investigating the effect of the permeability on the injectability of calcium phosphate pastes. Book of proceedings. 20th Interdisciplinary Research Conference on Injectable Osteoarticular Biomaterials and Bone Augmentation Procedures (GRIBOI). Torino, Italie
  • Habib M., M. Bohner, G. Baroud. (2009). Mechanisms underlying the limited injectability of hydraulic calcium phosphate paste: part II. Particle separation study. GRIBOI 2009,Talk. Page 104 (2009). Trois Islets, France
  • L. Jia. (2008). Development of a Dynamic Masking System for Improving the Quality of Plasma Sprayed Coatings. Thermal Spray Crossing Borders, Int. Thermal Spray Conference & Exposition. Maastricht, Pays-Bas
  • L. Jia. (2008). Nano-structured Electrolyte Coatings Prepared by Spraying of Suspensions. 9th Asia-Pacific Conference on Plasma Science and Technology (APCPST). Huangshan, Chine
  • L. Jia. (2008). Preparation of Nano-structured SOFC Electrolyte Coating by Radio Frequency Suspension Plasma Spraying. Thermal Spray Crossing Borders, Int. Thermal Spray Conf. & Expo. Maastricht, Pays-Bas
  • M. Habib, C. Damia, M. Bohner, G. Baroud. (2008). Suspension induction plasma spraying of a-TCP. GRIBOI 2008. Montreal, Canada
  • Metcalfe, C., Kesler, O., Rivard, T., Abatzoglou, N. A Method for Calculation of three Phases Boundary Length in Modeled Composite Electrodes fo Solid Oxide Fuel Cells. 58 th Canadian Chemical Engineering Conference 2008. Ottawa, Canada
  • Metcalfe, C., Lesler, O., Rivard, T. Amethod for Calculation of three Phase Boundary Length in Modeled Composite Electrodes for Solid Oxide Fuel Calls. 58th Canadian Chemical Engineering Conference 2008. Ottawa, Canada
  • Guo, M., Y. Shen, L. Jia. A review of induction plasma technology applied for SOFC at Université de Sherbrooke. ISPC 20, July 2011. Philadelphia, États-Unis
  • Rivard, T., N. Abatzoglou. A review of the FIB nanotomography of SPFC interfaces at the Université de Sherbrooke. NRC-FCRC Colloquium, 2008. Toronto, Canada
  • Loszach, M. Development and chararcterization of a biological-like apatite based on a suspension by inductive plasma. 4th S2TS, International Workshop on Solution and Suspension Thermal Spraying 2010. Tours, France
  • Dépôt de plasma de revêtements céramiques nanostructurés, chambre combinatoire. 1ère Journée nanomatériaux, 2010, Saint Pierre Du Perray. Paris, France
  • Almeida, V. A.B., L. Jia. Dépôt par plasma inductif SolPS des couches gradées en utilisant un système d'alimentation. Colloque Plasma-Québec, 2010. Montreal, Canada
  • Guo, W., L. Jia, G. Rauchs, W. Zhang, J. Ponthot. Evaluating the mechanical properties of plasma sprayed coatings by nanoin-dentation. 19th International Symposium on Plasma Chemistry, 2009. Bochum, Allemagne
  • Loszach, M. Fabrication and dissolution behavior of as-sprayed and heat treated biological-like apatite. ISP20, July 2011. Philadelphia, États-Unis
  • Shen, Y. GDC/LSCF Composite Nanopowder Preparation for IT-SOFC by Induction Plasma Spraying. ISPC 20, July 2011. Philadelphia, États-Unis
  • Proulx, P. Induction plasma nano-particles synthesis mod-elling - review and applications. 19th International Symposium on Plasma Chemistry, 2009. Bochum, Allemagne
  • Calabretta, D., B. Davis. Induction plasma synthesis of dense oxide ion layers for reverse combustion in the anhydrous molten salt Na–B-O-H system. International Thermal Spray Conference, 2009. Las Vegas, États-Unis
  • Fradet, M. Influence of the Precursors Composition on Plasma-Sprayed Hydroxyapatite. 18th Interdisciplinary Research Conference GRIBOI, 2008. Montreal, Canada
  • Darthout, E. La résistance aux cycles thermiques des dépôts nanostructurés de Lu2Si2O7-xZrSiO4 élaborés par plasma inductif. Colloque Plasma-Québec, 2010. Montreal, Canada
  • Le bilan après 10ans, d’un partenariat de recherche entre la compagnie NAP GLADU et l’Université de Sherbrooke. 79e Congrès de l’ACFAS, 2011. Sherbrooke, Canada
  • A. Vardelle, C. Chazelas, C. Marchand, G. Mariaux, H. Lorcet, D. Guenadou. Liquid materials processing: A challenge for thermal plasmas. 19th International Symposium on Plasma Chemistry, 2009. Bochum, Allemagne
  • Lutetium disilicate coatings development to protect SiC/SiC composites against hot water vapor corrosion. 4th S2TS, International Workshop on Solution and Suspension Thermal Spraying 2010. Tours, France
  • Darthout, É. Lutetium disilicate nanostructured coatings for environmental barrier application produced by solution plasma spraying. ISPC 2011. Philadelphia, États-Unis
  • Habib, M., G. Baroud, M. Bohner. Mechanism of phase separation during the injection of a calcium phosphate hydraulic paste, 8th World Biomaterials Congress 2008, v 1, p 4, 2008. 8th World Biomaterials Congress 2008.
  • Shen, Y. Nanocomposite GDC/LSCF Cathode Material Synthesis for IT-SOFC by Induction Plasma Spaying. Colloque Plasma-Québec, 2010. Montreal, Canada
  • On the Quest of Medium Temperature, Low Thermal Mass, Low Carbon Imprint, Adiabatic, SOFCs using Induction Plasma Technology. LCES-2011. Dalian, Chine
  • Personal Protection and secure industrial production. NANO SAFE, 2008. Grenoble, France
  • Blanchard, J., Eslahpazir Esfandabadi, R., Abatzoglou, N,. Plasma-synthesized Nanocatalysts for Green Diesel Synthesis via Fisher-Tropsch in 3-phase slurry Reactors: Preliminary Results. 58 th Canadian Chemical Engineering Conf, 2008. Ottawa, Canada
  • G. Baroud, N. Faucheux. Plasma synthesised Nanomaterials for existing and potential biomedical applications. International Round Table on Thermal Plasmas, 2009. Alexandria, Égypte
  • Jia, L. Preparation of Nano-structured Dense and Thin Electrolyte for SOFCs by Suspension Plasma Spraying. 19th International Symposium on Plasma Chemistry, 2009. Bochum, Allemagne
  • Shen, Y., V. Almeida. Preparation of nanocomposite GDC/LSCF cathode material for IT-SOFC by RF induction plasma spraying. International Thermal Spray Conference and Excposition, 2010, US.
  • Harbec, D., A. Tagnit-Hamou. RF Plasma Glass Nanoparticles As Alternative Supplementary Cementitious Material. 3rd International Symposium on Nanotechnology in Construction, 2009. Prague, Tchèque, République
  • Harbec, D., A.Tagnit-Hamou. Sphéroïdisation de poudres de verre par torche à plasma inductif pour application dans les matériaux cimentaires. Colloque Plasma-Québec, 2010. Montreal, Canada
  • Fauteux-Lefebvre, C., Blanchard, J., Abatzoglou, N. Stream Reforming of Hexadecane over Micrometric Nickel Catalysts. 58 th Canadian Chemical Engineering Conf, 2008. Ottawa, Canada
  • Habib, M., Damia, C., Bohner, M., Baroud, G. Suspension Induction-Plasma Spraying of alpha-TCP. 18th Interdisciplinary Research Conference On Injectable Biomaterials/ Biomechanics for Minimally Invasive Clinical Applications, 2008. Montreal, Canada
  • R. Eslahpazir Esfadabadi, F. Gitzhofer, J. Blanchard and N. Abatzoglou. Synthesis of Iron Carbide Nanoparticles by Inductively Coupled Thermal Plasma. Colloque Plasma-Québec 2008. Montreal
  • Bolduc, I., P. Proulx. Synthesis of alloyed metal powders produced by induction plasma. 19th International Symposium on Plasma Chemistry, 2009. Bochum, Allemagne
  • Synthèse de nanostructures par plasma inductif. Présentation Chimie ParisTech , 2010. Paris, France
  • Synthèse par plasma de matériaux nanostructurés. Entretiens Jacques Cartier, 2010. Lyon, France
  • Mostajeran Goortani, B., E. Bouyer, M.Mousavi. Ultra Fast Thermal Plasma Preparation of Solid Si Films for Photovoltaic Cells. Commissariat à l'Énergie Atomique (CEA) 2009. Grenoble, France
  • Rivard, T., N. Abatzoglou, O. Kesler, M. Craig Metcalfe. Une méthode tomographique pour calculer la TPBL d’une cathode SOFC : Analyse de la sommation des voxels. ACFAS, 2010. Montreal, Canada
  • Blanchard, J., R. Eslahpazir Esfandabadi, N. Abatzoglou. Utilisation du plasma inductif pour la production par atomisation d'un catalyseur nanométrique de carbure de fer pour la synthèse Fischer-Tropsch. Colloque Plasma-Québec, 2010. Montreal, Canada
  • Rivard, T., Abatzaglou, N., Metcalfe, C. Verification of a Characterization Tool of Triple Phase Boundary Length Measurement in Porous Composite Cathodes using Tomography. 58th Canadian Chemical Engingeering Conference 2008. Ottawa, Canada
  • Élaboration de revêtements nanostructurés de Lu2Si2O7-xZrSiO4 élaborés par plasma inductif. Plasma Québec, 2010. Montreal, Canada