Ryan Gosselin

Refereed Publications

  • Gosselin R. and Lacombe M.O. (2012) Determining Bulk Powder Particle Size through Texture Analysis, Machine Vision and Applications, submitted.
  • Ziadi A., Maldague X., Duchesne C. and Gosselin R. (2012) Visible and Near-Infrared Light Transmission: a Hybrid Imaging Method for Non-destructive Meat Quality Evaluation, Infrared
  • Physics & Technology, submitted.
  • Castellanos Gil E., Gosselin R. and Abatzoglou N. (2012) A NIRS Methodology to Measure Radial and Axial Concentration Profiles in Flowing Powder Mixtures, Powder Technology, available online.
  • Demers A.M., Gosselin R., Simard J.S. and Abatzoglou N. (2012) In-line Near Infrared Spectroscopy Monitoring of Pharmaceutical Powder Moisture in a Fluidized Bed Dryer: an Efficient Methodology for Chemometric Model Development, Canadian Journal of Chemical Engineering, 90, 299-303.
  • Salvas J., Simard J.S., Gosselin R. and Abatzoglou N. (2011) Calibration of Multivariate Predictive Models: The Study of Factors Influencing the Prediction Accuracy of Raman Spectroscopy Applied to Pharmaceutical Tablets, American Pharmaceutical Review, 1, 36-43
  • Gosselin R., Rodrigue D. and Duchesne C. (2011) A Hyperspectral Imaging Sensor for On-line Quality Control of Extruded Polymer Composite Products, Computers & Chemical Engineering, 35, 296-306.
  • Gosselin R., Rodrigue D. and Duchesne C. (2010) A Bootstrap-VIP Approach for Selecting Wavelength Intervals in Spectral Imaging Applications, Chemometrics and Intelligent Laboratory Systems, 100: 12-21.
  • Gosselin R., Rodrigue D., González-Nuñez R. and Duchesne C. (2009) Potential of Hyperspectral Imaging for Quality Control of Polymer Blend Films, Industrial & Engineering Chemistry Research, 48: 3033-3042.
  • Gosselin R., Duchesne C. and Rodrigue D. (2008) On-line Prediction of Crystallinity Spatial Distribution Across Polymer Films Using NIR Spectral Imaging and Chemometrics Methods, The Canadian Journal of Chemical Engineering, 86: 869-878.
  • Gosselin R., Duchesne C. and Rodrigue D. (2008) On the Characterization of Polymer Powders Mixing Dynamics by Texture Analysis, Powder Technology, 183: 177-188.
  • Gosselin R., Rodrigue D. and Riedl B. (2006) Injection moulding of Post-Consumer Wood/Plastic Composites I: Morphology, Journal of Thermoplastic Composite Materials, 19(6): 639-657.
  • Gosselin R., Rodrigue D. and Riedl B. (2006) Injection moulding of Post-Consumer Wood/Plastic Composites II: Mechanical Properties, Journal of Thermoplastic Composite Materials, 19(6): 659-669.
  • Gosselin R. and Rodrigue D. (2005) Cell morphology analysis of high density polymer foams, Polymer Testing, 24: 1027-1035.
  • Rodrigue D., Pelletier Y. and Gosselin R. (2004) Torsion Properties of Cylindrical Polymer Foams, Journal of Cellular Plastics, 5: 411-419.

Conference Proceedings

  • Yekpe K., Abatzoglou N., Bataille B., Gosselin R., Sharkawi T., Simard J.S. (2012) Investigation of Turbidimetry as a Possible PAT Tool to Measure Disintegration Profiles of Finished Solid Products, World meeting on Pharmaceutics, Biopharmaceutics and Pharmaceutical Technology, Istanbul, Turkey, 19-20 March.
  • Gosselin R., Rodrigue D. and Duchesne C. (2009) Property Prediction of Wood/Plastic Composites through Spectral Imaging and Chemometrics Methods, 8th World Congress of Chemical Engineering, Montréal, Canada, 23-27 August.
  • Aït Aissa A., Cousineau-Pelletier M., Gosselin R., Duchesne C. and Rodrigue D. (2009) Mixing of Polymer Powders of Different Particle Sizes in a Rotating Mold, ANTEC 2009, Chicago, USA, 22-24 June.
  • Gosselin R., Rodrigue D., González-Nuñez R., Duchesne C. (2009) Quality Control of Polymer Products through Spectral Imaging and Chemometrics Methods, ANTEC 2009, Chicago, USA, 22-24 June.
  • Aït Aissa A., Gosselin R., Duchesne C. and Rodrigue D. (2008) Modeling the Mixing of Two Polymer Powders of Different Particle Sizes, ANTEC 2008, Milwaukee, USA, 4-6 May.
  • Gosselin R., Duchesne C., Rodrigue D. and González-Nuñez R. (2007) Using Image Texture to Predict the Mechanical Properties of Polymer Films, CEIMEXCAN, Québec, Canada, 25 November.
  • Gosselin R., Rodrigue D. and Riedl B. (2007) Injection of Recycled Wood/Plastic Composites, 3rd Wood Fibre Polymer Composites International Symposium, Bordeaux, France, 27-27 March.
  • Gosselin R., Rodrigue D. and Riedl B. (2006) Fracture Behavior of Injection Moulding Post-Consumer Wood/Plastic Composite Foams, SPE ANTEC 2006, Charlotte, USA, 7-11 May.
  • Riedl B., Michaud F., Rodrigue D., and Gosselin R. (2004) Extrusion de Mélange Bois Plastique Recyclé. Rôle de Différents Facteurs: Additifs, Humidité et Granulométrie du Bois et Résines Plastiques Secondaires. 6e Colloque Sciences et Industrie du Bois. ENSTIB Épinal, France, 2-4 November.
  • Gosselin R., Rodrigue D. and Riedl B. (2004) Injection Moulding of Foamed Wood/Plastic Composites, 20th Annual Meeting of the Polymer Processing Society: PPS-20, Akron, USA, 20-24 June.
  • Rodrigue D., Pelletier Y. and Gosselin R. (2004) Torsion Properties of Cylindrical Polymer Foams, SPE ANTEC 2004, Chicago, USA, 16-20 May.
  • Rodrigue D. and Gosselin R. (2003) The Effect of Nucleating Agents on Polypropylene Foam Morphology, Blowing Agents and Foaming Processes Conference 2003, Munich, Germany, 19-20 May.
  • Rodrigue D. and Gosselin R. (2002) The Effect of Calcium Carbonate Particle Size on LDPE Foam Morphology, Proc. of the 4th International Blowing Agents and Foaming Processes Conference 2001, RAPRA, Heidelberg, Germany, 27-28 May.

Oral Presentations

  • Gosselin R., Lacombe M.O. (2012) Using Wavelet Texture Analysis to Determine Bulk Powder Particle Size, International Forum on Process Analytical Chemistry (IFPAC), Baltimore, USA, January.
  • Guay J.M., Lapointe-Garant P.P., Simard J.S., Gosselin R., Abatzoglou N. (2012) Capabilities and Limitations of In-line Multivariate LIF Analyzer for Powder Monitoring, IFPAC, Baltimore, USA, January.
  • Abatzoglou N., Castellanos-Gil E., Gosselin R. (2011) Axial and Radial Composition Profiles in Flowing Particulate Mixtures, CSChE, London, Canada, October.
  • Yekpe K., Demers A.M., Simard J.S., Gosselin R., Abatzoglou N. (2011) Near Infrared Spectroscopy as a PAT Tool to Monitor in-line Pharmaceutical Powders in Fluid-bed Dryers, Stats and Control Meeting, Québec, Canada, May.
  • Guay J.M., Simard J.S., Gosselin R. and Abatzoglou N. (2011) Développement d’un spectrofluoromètre multivarié pour l’analyse de produits pharmaceutiques, ACFAS, Sherbrooke, Canada, May.
  • Yekpe K., Simard J.S., Gosselin R. and Abatzoglou N. (2011) Application du principe de la qualité par la conception pour le contrôle qualité en industrie pharmaceutique, ACFAS, Sherbrooke, Canada, May.
  • Gosselin R., Rodrigue D. and Duchesne C. (2009) Property Prediction of Wood/Plastic Composites through Spectral Imaging and Chemometrics Methods, 8th World Congress of Chemical Engineering (WCCE8), Montréal, Canada, August.
  • Gosselin R., Rodrigue D. and Duchesne C. (2009) Quality Control of Polymer Products through Spectral Imaging and Chemometrics Methods, ANTEC, Chicago, USA, June.
  • Gosselin R., Rodrigue D., González-Nuñez R. and Duchesne C. (2008) Combining NIR Spectral Imaging and Chemometrics Methods to Predict Crystallinity Spatial Distribution across Polymer Films, CSChE, Ottawa, Canada, October.
  • Gosselin R., Rodrigue D. and Duchesne C. (2007) Quality Control of PE/PS Polymer Films through Multivariate Image Analysis, CSChE, Edmonton, Canada, October.
  • Gosselin R., Rodrigue D. and Duchesne C. (2006) Quality Control of Wood/Plastic Composites by Hyperspectral Imaging, CSChE, Sherbrooke, Canada, October.
  • Gosselin R., Riedl B. and Rodrigue D. (2006) Fracture Behaviour of Injection Moulding Post-Consumer Wood/Plastic Composite Foams, Annual Technical Conference of the Society of Plastics (ANTEC), Charlotte, USA, May.
  • Gosselin R., Rodrigue D. and Duchesne C. (2006) Quality Control of Wood/Plastic Composites by Hyperspectral Imaging, Stats and Control Meeting, Québec, Canada, May.
  • Gosselin R., Riedl B. and Rodrigue D. (2005) Injection Moulding of Foamed Post-Consumer Wood/Plastic Composites, Canadian Society of Chemical Engineering (CSChE), Toronto, Canada, October.
  • Gosselin R., Riedl B. and Rodrigue D. (2004) Injection de Composites Bois/Plastiques Moussés, Association Canadienne-Française pour l’Avancement du Savoir (ACFAS), Montréal, Canada, May.

Posters

  • Yekpe K., Abatzoglou N., Bataille B., Gosselin R., Sharkawi T., Simard J.S. (2012) Turbidity as a PAT Tool to Measure Disintegration Profiles of Finished Solid Products, World meeting on Pharmaceutics, Biopharmaceutics and Pharmaceutical Technology, Istanbul, Turkey, 19-20 March.
  • Abatzoglou N., Castellanos-Gil E., Gosselin R. (2012) A NIRS-based PAT tool to measure radial and axial concentration profiles in flowing powder mixtures: First results and Modelling efforts, International Forum on Process Analytical Chemistry (IFPAC), Baltimore, USA, January.
  • Gosselin R., Lacombe M.O. (2011) Inferring Particle Size Distribution of Bulk Powders using Texture Analysis and Chemometrics Methods, International Chemometrics Research Meeting (ICRM), Nijmegen, Netherlands, September.
  • Gosselin R., Simard J.S., Cournoyer A. and Abatzoglou N. (2010) On-line Liquid Ingredient concentration Monitoring of Multi-Component Pharmaceutical Products using UV-ATR Technology, CAC, Antwerp, Belgium, October.
  • Gosselin R., Rodrigue D. and Duchesne C. (2010) Hyperspectral Imaging for Monitoring and Quality Control in the Process Industry, Chemometrics in Analytical Chemistry (CAC), Antwerp, Belgium, October.
  • Tessier J., Gosselin R., Ait Aissa A., Rodrigue D. and Duchesne C. (2009) Color and Textural Methods for the Analysis of Particulate Mixtures, IWMIA, Valancia (Spain), October.
  • Gosselin R., Rodrigue D. and Duchesne C. (2009) Hyperspectral Image Analysis and Applications in Polymer Processing, International Workshop on Multivariate Image Analysis (IWMIA), Valencia, Spain, September.
  • Gosselin R., Rodrigue D. and Duchesne C. (2008) A Guiding Tool for Selecting the Appropriate Feature Extraction in Spectral Image Analysis, Canadian Society of Chemical Engineering (CSChE), Ottawa, Canada, October.